PGS 0610 pages

Arcotec GmbH
Rotweg 24 | D-71297 Mönsheim
Tel. +49 (0) 7044/9212-0 | Fax +49 (0) 7044/9212-12
www.arcotec.com | info@arcotec.com
Application:
The Arcospot® PGS 061 device is used for the in-line pre-treatment of moulded parts, profiles, adhesion
grooves and folded boxes. Treatment speeds exceeding 200m/min. can be achieved. The treatment
clearance from the surface is approx. 6-10mm.
Design:
The device comprises the semi-conductor generator with an external transformer for a generation of
high-voltage and the electrode head for the spark discharge (plasma). The connection between the
transformer and the generator is of a plug-in design. The electrode head is connected to the transformer
by a hose which comprises the high-voltage and the compressed air lines.
The electronics are of a modular design and the individual modules are of a plug-in design.
The connections for the signal inputs and outputs are on connectors (industrial standard) so that they can
be controlled via an overriding system.
Subject to technical modifications.
Technical Data:
Line supply: 230 V AC, 50 – 60 Hz
Power configuration: 0.9 kVA
Air consumption: approx. 100 l/min
Compressed air connection: 4 – 6 bar
Treatment width: max. 15mm
Standard hose length: connection between generator and ext. transformer: 2.0m
Generator dimensions: 450 x 480 x 180mm
Weight: 21kg
Arcospot® PGS 061 Plasma Device
© Arcotec GmbH 2009 | Arcotec GmbH | Rotweg 24 | D-71297 Mönsheim | Tel.: +49(0)704492120 | Fax +49(0)7044921212
Modifications and mistakes reserved. Product Similar to illustration.