SEL-2245-2 Analog Input Module0 pages
SEL-2245-2 Analog Input Module
The SEL-2245-2 provides dc analog inputs for the SEL Axion®. Within an Axion system, install as many as sixteen
SEL-2245-2 modules in any combination you want.
Front Panel
Mechanical Installation
Each SEL-2242 chassis/backplane has four or ten slots,
labeled A–J. Slots B–J support the SEL-2245-2 modules.
Figure 2
Figure 1
SEL-2245-2 DC Analog Input Module
Schweitzer Engineering Laboratories, Inc.
Notch for Module Alignment
To install an SEL-2245-2 module, tip the top of the
module away from the chassis, align the notch on the
bottom of the module (shown in Figure 2) with the slot
you want on the chassis, and place the module on the
bottom lip of the chassis as Figure 3 illustrates. The
module is aligned properly when it rests entirely on the
lip of the chassis.
SEL-2245-2 Data Sheet
"