oduCtPr
S
VELTIE
NO
Kati® Blitz compact Plus
With the Flexi-Sonde the Kati® Blitz compact Plus has been given a new and flexible guiding
tip to enable passage through particularly tight curves in empty ducts. The sonde is adhered
directly onto the Ø 3 mm Polykat® fibreglass profile. Rigid parts such as brass sleeves no longer block the passage in cable ducts when excessively narrow curves are encountered. In the
past, strip ruptures would occur now and again at such points if the fibreglass profile snapped
off at the edge of the brass sleeve during passage through a bottleneck
With the Flexi-Sonde problems with really tight curves are a thing of the past. It is itself
extremely flexible and therefore capable of effortlessly passing through narrow-radius
empty ducts. The guide probe is made of high-quality TPU plastic with a wire rope at the
core. The tip is M5 externally threaded, thus making it possible to quickly replace guiding
heads, pulling eyes or cable grips.
Here you can find the product-video
from Kati® Blitz compact Plus
rod diameters (mm)
tested tensile strength of connection rod/end (kN)
minimum rad. of curvature (mm)
breaking strain of rod (kN)
rod length
20 m
30 m
50 m
Easy Grip
3.0
0.5
20
5.0
weight
art.-no.
1.10 kg
1.20 kg
1.40 kg
With the Flexi-Sonde
through tight curves
101821
101831
101851
The Easy Grip is a practical manual advancing device, which facilitates labour-saving
insertion of the fibreglass profile during long cable pulling operations. It is the ideal
accessory to the Kati® Blitz that enables very long or winding empty ducts to be
overcome in an even shorter space of time.
The Easy Grip keeps the fibreglass profile in its sleeve by an ingenious clamping
technique. Just an arm movement advances the pulling rod. There couldn’t be an
easier way of manual handling. Of course, the Easy Grip also functions in the reverse
direction when you need to pull the cable through the empty duct with the fibreglass
profile after insertion.
The manual advancing device consists of a high-tech, hard-wearing plastic. The
practical pulling device has an ergonomic shape and will fit any work-wear pocket.
It’s always at hand for the “man” on site. The Easy Grip enables up to 50 % time-saving,
with simple operation reducing the amount of effort. KATIMEX® achieves enormous
labour savings with this innovative product for cable-layers.
Here you can find the product-video
from Easy Grip
KATIMEX Cielker GmbH
04-2012
Bahnhofstraße 50
54584 Jünkerath / Germany
phone: +49 (0) 65 97 / 92 77-0
fax:
+49 (0) 65 97 / 92 77-40
mail: info@katimex.de
internet: www.katimex.com
Easy Grip
Manual advancing device made of high-tech, hard-wearing plastic,
ergonomic shape, for both left- and right-handed users.
Dimensions 126 mm x 53 mm x 40 mm
max. tensile load
20 kg
weight
90 g
X
art.-no.
101070