ArmaFORM PET AC0 pages
Technical Data: April 2013
ArmaFORM PET/W AC: structural foam core
Polyethylene Therephthalate (Welded)
AC60 *
AC80
AC100
AC115
AC135
AC150
AC200
Density
ISO 845
kg/m³
60 (1)
80 (1)
100 (1)
115 (1)
135 (1)
150 (1)
200 (1)
Compression
Strength
ASTM D 1621 b
MPa
0,7
1,0
1,5
1,8
2,3
2,6
3,6
Compression
Modulus
ASTM D 1621 b
ISO 844
MPa
MPa
55
35
75
60
105
70
120
80
150
90
180
105
220
157
Shear Strength
ISO 1922
MPa
0,5
0,6
0,9
1,0
1,3
1,4
1,8
Shear Modulus
ISO 1922
MPa
11
20
25
30
35
45
50
Shear Strain
ISO 1922
%
25
35
30
20
15
10
5
Tensile Strength
ASTM C 297
MPa
1,6
2,1
2,4
2,7
3
3,4
4,4
Tensile Modulus
ASTM C 297
MPa
60
75
105
120
150
190
230
Thermal
Conductivity
ISO 12667
W/mK 0,034
0,034
0,034
0,035
0,037
0,041
0,043
Fire, Smoke & Toxicity (2)
B2
EN ISO 11925:2
tbd
B2
B2
B2
B2
B2
B2
FMVSS
ISO 3795
tbd
Passed
Passed
Passed
Passed
Passed
Passed
UL
UL 94
tbd
HBF
HBF
HBF
HBF
HBF
HBF
Tolerances
Length
Width
Diagonal Thickness
Dimensions (mm) (3)
2.448
1.005
tbc (4)
AC80-AC200: 5–150mm AC60: 10-150 mm
Tolerances (mm)
at room temperature
+/- 5
+/- 5
≤4
≤ 100mm: AC80-AC200 +/- 0,5 AC60: +/- 0,7
≥ 100mm: +/- 1
preliminary data (April 2013)
Tolerances AC80-AC200: +/- 5 kg/m³; AC60: -5/+10 kg/m³
For detailed test results and certificates please contact us.
(3)
Standard dimension. Further dimensions on special request.
(4)
Depending on length and width combination.
All values are average production figures. Minimum values on request.
m
R
aFO M PE
T
(1)
Ar
*
(2)
DN
V- c e r t i f i e d
Armacell provides this information as a technical service. To the extent the information is derived from sources other than Armacell, Armacell
is substantially, if not wholly, relying upon the other source(s) to provide accurate information. Information provided as a result of Armacell‘s
own technical analysis and testing is accurate to the extent of our knowledge and ability, using effective standardized methods and procedures.
Each user of these products, or information, should perform their own tests to determine the safety, fitness and suitability of these products, or
combination of products, for any foreseeable purposes, applications and uses by the user and by any third party to which yhe user may convey the
products. Since Armacell cannot control the end of this product, Armacell does not guarantee that the user will obtain the same results as published
in this document. The data and information is provided as technical service, and the data and information are subject to change without notice.
Armacell Benelux S.A.
Rue des Trois Entités 9 - B-4890 Thimister-Clermont
Tel.: +32 (0) 87 32 50 70 - Fax: +32 (0) 87 32 50 71
info.armaform@armacell.com - www.armacell-foam-cores.com
Copyright: Armacell Benelux SA, subject to changes - 200-004/07-0611-(GB)-WW