R1000 pages
CONFIGURATION
R100CNC Code: 4.100
The CNC configuration comes with the granite metrological column with
reference and motorized positioning arm, this configuration allows to emphasi-
ze the cilindricity and the straightness of the detail and also to perform
measurement automatic cycles granting a very big time saving and high
flexibility.
R100 manual Code: 4.104
The roundness-tester R100 version with manual
column and arm is ideal for those who don't need to
perform automatic positioning cycles and straightness
or cilindricity measurements.
With this configuration the column run length is of 320
mm while the arm run length if of 150 mm.
Metrology Systems
ACCESSORIES
UJ t ■'Si? | o ill ^ S "° ucno | * | ||||
Allows to expand the table to a diameter of 250 mm when there are very big pieces to be measured. | Finable directly on the table, external grip diameter 1v35mm, internal grip diameter 25-95mm. | Finable directly on the table, internal/external reversible jaws, external grip diameter lT32mm, internal grip diameter IfWIOmm. | Allows the calibration and verifica- tion of pickup and electronic board sensitivity, 1/ urn nominal step. |
Roundness-Tesl
R100
The best way to measure
83
Sample hemisphere made of optical
glass, typical error <0.05 |im,
allows control of the table oscillation.
High precision steel cylinder, allows the alignment
and verification of parallelism and straightness of
the Z axis. Diameter 80 mm, height 300 mm,
typical deviation 1 jam.
TECHNICAL CHARACTERISTICS
C table axis
Z Column axis
R arm axis
Calculables parameters
Pickup
Dimensions
Weight
Power supply
R100 CNC
Table diameter 160 mm
Maximum load 200 N
Centering and leveling: ± 3mm - ± 2°
Table precision: 0,1 \sm_
Extension terminals can be easily interchanged
thanks to their threaded coupling.
- erminal 1 = 32 mm Code 4300
■ erminal 1= 72 mm Code 4.301
• erminal 1= 112 mm Code 4.302
■ like Terminal L= 72 mm Code 4.303
R100 MANUAL
Table diameter 160 mm
Maximum load 200 N
Centering and leveling: ± 3mm - ± 2°
Table precision: 0,1 pm_
Effective stroke: 400 mm
Motorized, of measurement
Straightness error on 100 mm: 0,3 urn
Straightness error on 400 mm: 0,8 pm
Measurement speed: 0,5-1-2 mm/s
Positioning speed: 0-15 mm/s_
Effective stroke: 175 mm
Motorized, of positioning
Positioning speed: 0-15 mm/s
Effective stroke: 300 mm
Manual
Effective stroke: 175 mm
Manual
roundness, straightness, cilindricity, conicity,
cone shape, concentricity, parallelism, coaxiality,
run-out, total run-out, thickness variation
roundness, flatness, concentricity, coaxiality,
run out, total run-out
Bi directional with impact protection
Measurement range: 0,6 mm
Resolution: 0,001 urn
Bi directional with impact protection
Measurement range: 0,6 mm
Resolution: 0,001 urn
530 x 520 x 815 mm (L x P x H)
58 kg_
530 x 520 x 815 mm(L<PxH]
52 kg
110-240 V 50-60 Hz
110-240 V 50 60 Hz
www.sm-mstruments.com
"