MCC-10 pages

CONTROL

ENG

www.phytron.eu/MCC-1

MCC-1
Programmable controller for one axis
The MCC-1, phytron‘s freely programmable
dual axis stepper motor controller, is a compact stand-alone unit for 2 phase stepper
motors providing up to 3.5 APEAK phase current.
Controllers in the MCC series have many inputs and outputs (digital and analogue) and
encoder inputs for step position monitoring
plus possibilities to connect limit switches all
as standard.
Due to the viariety of available host interfaces
(USB, Ethernet, Profibus etc.), the MCC can

be quickly and easily integrated into existing
applications.
This controller is easy to program and can
operate either directly (remote) via its bus or
stand-alone (local) with the program routines
stored within.

Applications
As a compact stand-alone device, it convinces expecially in small experimental setups,
machines and equipment, which can be dispensed in a PLC.

Highlights
LabVIEW®
LabVIEW® is a simulation software with
a graphical interface. Use the VIs (Virtual
Instruments) generated by phytron and
integrate them in your LabVIEW® project.
So you can easily control the MCC from your
usual programming environment.
LabVIEW®

Stand-alone
IQ
Stand-alone

Once programmed the MCC-1
can work without additional
PC/controller.

All-in-one solution
A compact device with controller, I/O and power stage by
55 x 127 x 110 mm

Edition 2012 July

MiniLog-Comm®
MiniLog-Comm® is phytron‘s communication software running under Windows®
to
facilitate
programming
of
the
stepper motor controller. It provides
quick and easy generation of sequential
programs.
The MiniLog-Comm® software is delivered
free with phytron controllers and offers
additional functions for test mode,
step by step control or single sequence
command execution of a motor move, a
motor status window and even a Motion
Creator.

In Focus
IQ
Stand-alone

Integrated Driver

Analogue

El. Isolated

Digital

• 1 axis stepper motor control unit with
integrated power stages
• Bipolar control of 2 phase stepper
motors
• Phase currents up to 3.5 APEAK
• Power supply 24 to 48 VDC
• Step resolution 1/1 up to 1/256 step
• Host interfaces: USB, Ethernet, Profibus, RS 485 or RS 232
• Interfaces:
-

1 encoder
1 analogue input
8 bidirectional, digital inputs and outputs
2 limit switches
2 redundant designed enable inputs

• Programming in well-tried MiniLog
format, acc. to DIN 66025 or in
LabVIEW®
• LabVIEW® driver for including the MCC
in your LabVIEW® project
• Remote or local mode