New TS9200 Jet Valve0 pages

Product Data Sheet
TS9200D Series
Jet Tech
The TS9200D Jet Tech is a non-contact dispense valve
capable of jetting fluid viscosities to 400,000 Cps. Jet
Tech offers a fast jetting action producing hundreds of
precise droplets in less than one second.
The main feature of the valve is a single, easily
replaceable diaphragm to eliminate dynamic fluid seals
found in other jet valves. No longer is it necessary to
disassemble, clean and replace worn seals, which
translates into saving time and money. The diaphragm
also allows fast cycle rates because of its very small
mass. There is no large sliding valve stem that slows
down the process. With this novel diaphragm design,
the energy needed to eject a drop can be adjusted
providing a wider process window.
It’s Fast – 300 drops/sec continuous duty.
50%
increase in throughput over conventional Jet valves.
It’s Simple to Clean – only 2 parts contact the fluid.
Conventional Jet valves can have as many as 8 parts
requiring cleaning. With only two parts to clean, cleaning
the TS9200D takes only minutes and there is no need to
remove the Jet valve from the robot. A diaphragm and
nozzle plate can be installed immediately without the
need to carefully calibrate the Jet valve saving valuable
production time and no special off-line cleaner is
required.

It’s Cool – the advanced electronic drive
provides power when required and reduces
power when idle. The internal air flow
cools the Jet body so it runs cool even
during high-speed, continuous operation.
The integral nozzle heater heats only the
fluid in the nozzle plate and is thermally
isolated from the jet body.
It’s Easy to Integrate – In combination
with the standalone TS920 controller, a
single trigger line is all that is needed to be
dispensing complex dispensing programs.

FEATURES AND BENEFITS
•
•
•
•
•
•
•
•
•

Non contact Jetting technology
Accurate and precise dispensing
High speed, up 300 drops/sec
Repeatable drop size as small as 10 nl
Jet fluid up to 400K Cps.
No fluid seals to clean or replace
Integral heater with minimal fluid heated
Quick and simple setup
Low total cost of ownership

It’s Capable – the TS9200D generates a very high drop
velocity allowing a wide range of fluids and applications.
In addition, the drop velocity can be easily changed to
help fine tune the process and achieve a high process
capability and wide process window.

USA & Canada +1 714 230 2398

www.techconsystems.com
 

Version 1.00