DS-MOPA_M0 pages
LASER MARKING
MULTIWAVE - M SERIES
Datalogic’s “Multiwave” series
MW-10M & MW-20M MOPA Pulsed Fiber Lasers
Optimized for Laser Marking at 1064 nm
Datalogic proudly introduces the “Multiwave” series
of high performance MOPA pulsed fiber laser,
specifically designed and engineered for demanding
laser marking industrial applications.
MW-10M and MW 20M is a family of diode-pumped,
pulsed fiber lasers which have been specifically
designed to produce the highest possible pulse
energies and peak powers over the largest pulse
repetition frequency range. With user selectable
pulse widths from 10 ns to 200 nsrange, while
mantaining high beamquality. With very high peak
powers and pulse stability, “Multiwave” Series offer
more flexibility, performance and control than any
other fiber or solid state laser available today.
New Datalogic “Multiwave” family of high
performance MOPA (Master Oscillator Power
Amplifier) lasers allows pulse width selection, pulse
triggering, gating and equalization, ASE suppression
and residual laser emission, and beam quality well
beyond fiber-based Q-switched and competitive
MOPA laser designs.
MW-10M and MW-20M lasers are air cooled compact
OEM module easy to install and to integrate into any
industrial products or production line.
Costant Energy Mode
thighlightS
•tHigh beam quality with typical M2 ≈1.3 over entire operating range
•tMaximum peak power >12 kW
•tAdjustable Pulse width from 10 ns to 200 ns with Repetition Rate from
2KHz to 500KHz
•tConstant Energy and Constant Peak Power modes
•tNo laser emission between pulses - no emission bleed through
•tFast external modulation of pulse energy (analog or digital)
•tNear zero warm-up time from cold turn-on to full specs
•tHigh reliability all-fiber design, using long-life single emitter diodes
Constant Peak Power Mode
tAPPLICATIONS
•tMicromachining
•tPrecision marking
•tPlastic marking and engraving
•tSolar panel scribing
•tTrimming
laser marking on stainless steel
www.datalogic.com
"