OEM Pressure Sensor MDM2900 pages
MDM290 Piezoresistive OEM Differential Pressure sensor
MDM290 Piezoresistive OEM Differential Pressure sensor
Features
·
Pressure range 035kPa…3.5MPa
·
Constant current power supply
·
Isolated construction, possible to various media
·
OEM differential pressure sensor
·
316L stainless steel
·
High static pressure 20MPa
Application
·
Industrial process control
·
differential pressure measure
·
gas, liquid pressure measure
·
Pressure checking meter
·
Pressure calibrator
·
Ventura and eddy-current flow meter
Introduction
MDM290 piezoresistive differential pressure sensor is OEM differential pressure sensor with
stainless steel isolated diaphragm. It has integrated construction, high static pressure, high stability and
good reliability. The high and low pressure sides are protected by isolated diaphragm. It can be used for
measuring corrosive and conductive flow media. The measured differential pressure is transmitted onto
the die through the diaphragm and filling silicon oil, so that the sensor could measure differential pressure
precisely. The sensor is tested on the advanced production line, with the popular dimension, MDM290
differential pressure sensors are widely used for industrial process control and differential pressure
measure fields, etc.
Electric Performance
Power supply: ≤2.0mADC
Electric connection: 100mm silicon rubber flexible wires
Common mode voltage input: 50% of input (typ.)
Input impedance: 3kΩ8kΩ
Output impedance: 3.5kΩ6kΩ
Response Time (10%90%): <1ms
Insulation resistor: 100MΩ, 100VDC
Overpressure: refer to Order Guide
Max. static pressure: 20MPa
Zero drift/static pressure: ≤0.5mV/MPa
-1-
http: //www.microsensor.cn
Add: No.18,Yingda Road Baoji,P.R.China,
Tel: +86 917 3600739/3600832
721006
Fax3609977
"