BM-16 Multitask Plate Pipe Beveller0 pages

BM 16

BEVELLING MACHINE

Portable, handy beveling machine is
designed for milling edges of plates and
pipes made of steel, aluminum alloys,
brass, or plastic.
Depending on the chosen milling head
the machine enables beveling materials
with minimum thickness of 1.5 mm
(0.06’’) at the angles of 22.5°, 30°, 37.5°,
45°, 55° or 60° and with maximum bevel
width of 16 mm (0.63’’).
Each milling head uses 5 indexable
cutting inserts.
One milling head for beveling radious
enables beveling edges with radius of 2,
3, 4 or 5 mm with use of 4-sided indexable
R2, R3, R4 or R5 cutting inserts.
Countersinking of holes with minimum 40
mm (1.57’’) diameter is also possible.
BM-16 is equipped with continuous bevel
width adjustment, overload protection
and electronic speed control for use on a
variety of materials.
It is highly efficient machine for edge weld
preparation and rounding off steel construction
before painting or coating.

Max bevel width
16mm

Bevel radius R2,
R3, R4 or R5

Pipe OD beveling

Top beveling

Arched edge
beveling

Pipe ID beveling
Min. ID 40mm

Bevel angles
22.5°, 30°, 37.5°,
45°, 55° or 60°

Countersinking
Min. ID 40mm