UNIVERSAL MOUNTING SYSTEMS
UNIVERSAL MOUNTING SYSTEMS
Page 1 of 2
100 MOUNTING RING
The #100 mounting ring is a mounting flange
which will allow all shutter types LS, VS and
CS25 series to be mounted to a flat surface.
The mounting ring would be attached to a flat
surface and the shutter would then attach to
the ring via the #2 housing rear thread
(1.625in x 40TPI).
Figure 2
Vincent Associates has designed these universal mounting rings to allow our line of shutter devices to
be easily integrated into user applications. These rings can be utilized from our 1mm aperture to the
90mm size. By simply fastening these rings to any flat surface, the shutter can be easily attached via
its rear external optical thread into the customer’s system. The different size rings are available for
each of our shutter devices depending on the shutter’s external optical thread size. Please review the
following data, if you need further information; please contact one of our technical representatives for
further assistance.
Figure 1
90 MOUNTING RING
The #90 Mounting Ring will allow the CS25 series
only, to be mounted to a flat surface (see FIGURE
1). The mounting ring would be attached to a flat
surface using the four .120 inch diameter holes.
The shutter would then attach to the ring via the #3
housing rear thread (1.625 inch x 40TPI).
101 MOUNTING RING
The #101 mounting ring is a mounting flange
which will allow the CS45 series, to be
mounted to a flat surface. The mounting ring
would be attached to a flat surface and the
shutter would then attach to the ring via the
#2 housing rear thread (2.000in x 40TPI).
Figure 3