ASC 3511LN0 pages
www.asc-sensors.de
MEMS Capacitive Accelerometer
ASC 3511LN
Uniaxial
Ultra Low Noise (LN)
High g-Range
4 Wire System
Amplified Output
Made in Germany
Features
Range: ±2g to ±400g
DC Response
High Shock Resistance
Gas Damped
Excellent Bias and
Scale Factor Stability
Differential Mode
Capacitive MEMS Technology
The accelerometers are based on a capacitive MEMS technology and can be used in a low
frequency response up from 0Hz. Inside the sensor element, the seismic mass is connected
with two conductive capacitor plates. If the seismic mass oscillates between the two capacitor
plates the capacitance will change. This capacitance change is converted via an ASIC
(Application Specific Integrated Circuit) into an analog signal.
Description
Options
Customised Cable Length
Customised Connector
TEDS Module
Applications
Structural Monitoring and
Testing
Endurance Testing
Brake Test
Vibration Monitoring
Civil Engineering
Modal Analysis
Vehicle Testing
Automotive Ride Quality
& Comfort
Railway Engineering
Flutter Test
The model ASC 3511LN is an uniaxial accelerometer based on capacitive technology. It is over
a wide temperature range fully compensated an factory calibrated. The sensor has been
developed specifically for measuring relatively low level accelerations, as required in the
aerospace or automotive sector, for example. The amplified output is useable easy on a data
acquisition unit.
The signal is independent from the power between +8VDC to +30VDC. The package is hard
anodized aluminium that is rugged for automotive, industrial and military applications. With the
Cube-Form there are more possibilities for mounting. A very high flexible and rugged cable
provides a simple mounting on delicate positions.
The model ASC 3511LN is a Low Noise version which has a much lower noise and a better
frequency response. The four wire output can be connected to all data management systems.
ASC GmbH · Advanced Sensors Calibration · Schäfflerstraße 15 · 85276 Pfaffenhofen · Germany
"