High Current Relay 200, High Current Devices, High Current Solutions0 pages
Automotive Relays
High Current Devices
High Current Relay 200
ntNormally
ntLimiting
closed contact
continuous current 175A at 85°C
Typical applications
Energy management, battery coupling, start/stop.
F230_fcw5b
Contact Datatt
Contact arrangementtt
1 form B, 1 NC
Rated voltagett
12VDC
Max. switching voltagett
depends on load parameter set A)
Rated current, cable 50mm2tt
175A at 85°C
Limiting continuous current
t 23°C, load cable 35mm2tt
245A
t 85°C, load cable 35mm2tt
165A
t 110°C, load cable 35mm2tt
120A
t 23°C, load cable 50mm2tt
255A
2tt
t 85°C, load cable 50mm
175A
t 110°C, load cable 50mm2tt
130A
Limiting making currenttt
200A at <5VDC
Limiting breaking currenttt
200A at <5VDC
Limiting short-time currenttt
depends on load parameter set A)
Contact materialtt
AgSnO2
Contact stylett
single contact
Min. recommended contact loadtt
1A at 5V
Initial voltage droptt
100mV at 100A
Operate/release time typ. at nominal voltaget
25/35ms1)
2)t
Bounce time max.tt
Electrical endurancett
t 50A (on), 30A (cont.), 50A (off): tt
48000 cycles
t 80A (on), 30A (cont.), 120A (off): tt
1000 cycles
t 200A (on), 120A (cont.), 120A (off): t
1000 cycles
t repeated until 800000 cycles are reached3)
Mechanical endurancett
>107 ops.
Insulation Datatt
Initial dielectric strength
t between open contactstt
500VDC
t between contact and coiltt
500VDC
Load dump test
t ISO 7637-1 (12VDC), test pulse 5t no switching allowed during load dump
t ISO 7637-2 (24VDC), test pulse 5t no switching allowed during load dump
Other Datatt
EU RoHS/ELV compliancett
compliant
Ambient temperaturett
-40°C to +110°C
Climatic cycling with condensation,
t EN ISO 6988tt 240h (-10 to +65°C), 93% RH
Temperature cycling (shock),
t IEC 60068-2-14, Natt 600h (-40 to +110°C), <30s
Degree of protection
t splash water proof:tt
IP64 (IEC 60529), RT III (IEC 61810)
Corrosive gastt
5 ±1%NaCl, 96h, 35°C
Vibration resistance (functional),
t IEC 60068-2-64 (random)t
t10 to 2000Hz, min. 5g effective
Shock resistance (functional),
t IEC 60068-2-27 (half sine)tt
11ms min. 30g
Drop test, free falltt
1m onto concrete
Terminal typett
connector, screw
Weighttt
approx. 230g (8.1oz)
Packaging unittt
on request
1) tWith diode in parallel.
2) tRelease and bounce time depend on component in parallel to the coil, please contact
application engineering support.
3) tValidated with a load voltage of 5VDC.
A) tPlease contact TE relay application engineering.
Coil Datatt
Rated coil voltagett
Max. coil powertt
Max. coil temperaturett
12VDC
3.3W1)
155°C
1)t With diode in parallel.
Coil versions, DC coilt
t Coilt
Ratedt
Operatet
Releaset
Coilt
Rated coil
t
codetvoltagetvoltagetvoltaget
resistancet
power
tt
VDCtVDCtVDCt
Ω±10%tW
t
1001t
12t 7.2t1.2t37t 3.9
t
2001t
12t 7.2t1.2t43t 3.3
All figures are given for coil without pre-energization, at ambient temperature +23°C.
11-2012, Rev. 1112
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification according to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
1
"