Type 140/150 Power Feeds Models 200, 206, 2250 pages
SERVO PRODUCTS COMPANY
Type 140/150 Power Feeds
Models 200, 206, 225
Which SERVO Table Feed do you need for your Bridgeport® Mill?
Model 200 Table Feed
The models M-0200-140 or
-150 are for conventional
Bridgeport® Series I mills
with a handwheel. Note the
lead screw configuration.
This model is available as a
standard unit or as a
mounting hardware kit
K-0200 for the ECF T-140
or ECF T-150.
Standard Bridgeport table
lead screw end configuration
Use M-0200-140 or -150
Bridgeport Electronic Feed:
Replace with Servo Feed
M-0206-140 or -150
Model 206 Table Feed
The models M-0206-140 or -150 replace the Bridgeport Electronic
Feed, which may be identified as a Model 6-F or Model 8-F on the
feed. You should to look for that though it may be painted over.
Since the feed also has some gearing, you may think it’s a gearbox
feed, but note the dials.
How can you tell? The electronic feed has a dial allowing for
variable speed settings between .75 ipm and 35 ipm. It has a 4”
diameter DC brush-type motor extending back and down at a 45degree angle. It is originally painted black. If the old unit is already
removed from the table, you can tell by the lead screw, which ends
essentially at the end of the table.
This model is available as a standard unit and is now available as a
mounting hardware kit K-0206 for the ECF T-140 or ECF T-150.
- Side View Note 45° angle
down & back
Model 225 Table Feed
Bridgeport Gearbox Feed:
Replace with Servo Feed
M-0225-140 or -150
The models M-0225-140 or -150 replace the Bridgeport Gearbox
type feed. It is an older model than the electronic feed, and odds
are that you really have the electronic feed.
How can you tell? The gearbox feed has a single-speed AC motor
hanging straight down and uses levers to select a number of fixed
speeds. There are no dials for speed settings. If the old unit is
already removed from the table, you can tell by the lead screw,
which extends about 10” beyond the end of the table.
This model is available as a standard unit or as a mounting
hardware kit K-0225 for the ECF T-140 or ECF T-150.
Lever used to
select fixed speeds
For questions and reference installation drawings
Contact your Servo dealer or Servo Products Company Customer Service:
Phone: 800.521.7359 or 440.942.9999 or Fax: 440.942.9100
Email: info@ServoProductsCo.com or techsupport@ServoProductsCo.com
Website: www.ServoProductsCo.com
Form 0800-80857 121404
SERVO Tech Bulletin
"