Zhongji EPS Fluidized Beds&EPS Continuous Pre-Expanders0 pages
EPSSfrfCT&J*
EPS Fluidized Beds
Aft, 3^i55«aj*a«iEPS^fflffig^;
2.iS*7Bi«att4^S!iaS*«ia-^01Ktt» 3»«jSl«iJSStt
Main Features
1 The machine is attached to the Pre-Expander to form a complete
set. This machine uses the high voltage fan and heat exchanger
to form the warm air curtain, and then do the dialysis on the
pre-expanded EPS beads coming out of the Pre-Expander;
2.Tb further improve the expansibility of the pre-expanded beads
during the forming process, the bonding property between the
beads as well as the elasticity of the beads will help improve the
quality of the EPS products;
3 The temperature within the EPSFB1200 or EPSFB1600 fluidized
bed dryer, which is attached to the EPSBE1200 Batch Pre-Expander
and EPSBE1600 Batch Pre-Expander respectively, can reach 75 XJ,
and also use devices such as the vibratory sieve, EPS Block Crusher,
and Conveying Fan.
»». >BtfJR&0-5COrrrT, botomof the 45" *Ht ^SMSl
sieveing & crushing device overflow height O-SOOmm Fluidized Bed 45° flume drying fan
Technical Data
Number
1
i@ Items
Steam inlet DN
Power Supply
Max. Outer Dimension
Machine Net Weight
JMfc Type EPSFB900
Unit
kw
EPSFB1200
25
kg
5800x1000x1200
650
6.6
6500x1000x1200
700
15 EPS PRODUCTION LINE
EPS Continuous Pre-Expanders
i.EPsas©aaj*» $&, at\attT*a* cgpw&E) , s
Main Features
1. The automation phase of the beads expansion is accomplished
by loading the EPS beads into the feeder, expansion of the EPS
beads, the expanded EPS beads will then enter the fluidized
bed (optional), and then go through the Centrifugal Fan and
Conveying device to be transported into the Aging Silos;
2. The machine's feeder system includes the first-phase and
second-phase feeders. The first-phase feeder uses the
transformer to regulate the feeding speed, the second-phase
feeder uses the method of mobile guide way and wind pipe to
blow the EPS Beads to cool down the temperature, ensuring
that feeding is stable;
3. To accomplish the automatic feeding, the Photoelectric Switch
should control the level of the EPS beads in the Automatic
Negative Pressure Feeder (Optional).
The first and second feeders of
Continuous Pre-expander.
1. = the first feeder
2. —JfciSWSS: the second feeder
Technical Data
Items
m&W&R* Mfi Diameter
Dimension of Foaming Tank Height
ifcj^xt^ Production Capacity
SJHXPfflfi Steam Inlet DN
Jiiil^'HAPiig Compressed-Air Inlet DN
MftBLJl Steam Pressure
ESIS^E^J Compressed-AirPressure
lfi#**l Power Supply
Agitation Motor Rotafion
m^^K^ Max. Outer Dimension
&tim Machine Net Weight
Unit
mm
mm
kg/h
mm
mm
mpa
mpa
kw
r/min
mm
kg
2050x2900x2750
1500
3000X2500X3500
2800
EPS PRODUCTION LINE 16
"