Silicon Designs Model 1010 Digital Accelerometer Chip (LCC/LJCC)0 pages
SILICON DESIGNS, INC.
Advanced Accelerometer Solutions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Model 1010
Digital Accelerometer
Capacitive Micromachined
Nitrogen Damped
Hermetically Sealed
Digital Pulse Density Output
Fully Calibrated
Responds to DC & AC Acceleration
-55 to +125 °C Operation
+5 VDC, 2 mA Power (typical)
Non-Standard g Ranges Available
Integrated Sensor & Amplifier
LCC or J-Lead Surface Mount Package
Serialized for Traceability
TTL/CMOS Compatible
No External Reference Voltage
Easy Interface to Microprocessors
Good EMI Resistance
RoHS Compliant
Available G-Ranges
Full Scale
Acceleration
±2g
±5g
± 10 g
± 25 g
± 50 g
±100 g
±200 g *
20 pin LCC
1010L-002
1010L-005
1010L-010
1010L-025
1010L-050
1010L-100
1010L-200
20 pin JLCC
1010J-002
1010J-005
1010J-010
1010J-025
1010J-050
1010J-100
1010J-200
* Recommended for Down Hole Drilling
DESCRIPTION
The Model 1010 is a low-cost, integrated accelerometer for use in zero to medium frequency instrumentation applications.
Each miniature, hermetically sealed package combines a micro-machined capacitive sense element and a custom integrated
circuit that includes a sense amplifier and sigma-delta A/D converter. It is relatively insensitive to temperature changes and
gradients. Each device is marked with a serial number on its bottom surface for traceability. An optional calibration test sheet
(1010-TST) is also available which lists the measured bias, scale factor, linearity, operating current and frequency response.
OPERATION
The Model 1010 produces a digital pulse train in which the density of pulses (number of pulses per second) is proportional to
applied acceleration. It requires a single +5 volt power supply and a TTL/CMOS level clock of 100kHz-1MHz. The output is
ratiometric to the clock frequency and independent of the power supply voltage. Two forms of digital signals are provided for
direct interfacing to a microprocessor or counter. The sensitive axis is perpendicular to the bottom of the package, with
positive acceleration defined as a force pushing on the bottom of the package. External digital line drivers can be used to drive
long cables or when used in an electrically noisy environment.
APPLICATIONS
• Automotive
• Air Bags
• Active Suspension
• Adaptive Brakes
• Security Systems
• Shipping Recorders
• Appliances
• Vibration Monitoring
• Vibration Analysis
• Machine Control
• Modal Analysis
• Robotics
• Crash Testing
• Instrumentation
Output Pulse Density
Output Pulse Density
F
F
FCLK /2
FCLK /2
NEGATIVE
NEGATIVE
ACCELERATION
ACCELERATION-full -full
scale
0
0
scale
0.350
"L" SUFFIX
PACKAGE
0.350
Positive
Acceleration
0.350
0.105
"J" SUFFIX
PACKAGE
+full
+full
scale
scale
POSITIVE
POSITIVE
ACCELERATION
ACCELERATION
Positive
Acceleration
0.350
0.165
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
th
Silicon Designs, Inc. • 13905 NE 128 Street, Kirkland WA 98034 • Phone: 425-391-8329 • Fax: 425-391-0446
www.silicondesigns.com
[page 1]
September 2012