By-Pass Filtration Systems0 pages
ENGINES
ENGINE OIL FILTRATION
FIVE PROVEN FACTS
Fitting a By-pass filter system to an engine offers:
When oil in an internal combustion engine is kept clean it does
not wear out, its viscosity does not change; its additive package
is not depleted; acids are kept at minimal levels in the engine
and clean oil does not have to be changed.
Particle removal to 1 Micron plus 100% water removal.
Fitting a Filtakleen filter to an engine will extend the oil and
filter life up to 160,000kms /96,000 possible between changes.
Removing all water content reduces the acid formation in the oil.
This takes away the workload of the alkaline additives, and
extends the life of the TBN, and the working life of the oil. It also
reduces the workload of the main filter, extending its life.
The engine will run with cleaner oil, which means a cleaner
engine, less component wear and reduced emissions.
When a Filtakleen system is fitted, the oil and main filter should
be changed. Afterwards Filtakleen filters should be changed 3
monthly, with the main filter and oil being changed annually or
when the indicated mileage is reached. The engine oil filtration
system comes in 4 different sizes;
When an engine is run on clean oil 100% of the time, engine
wear is significantly reduced and you can routinely expect to
more than double the historical or expected life of the engine.
Significantly extending oil life
Clean oil circulating in an engine 100% of the time does not
have to be routinely changed. The only time an oil change will
be necessary is when the oil becomes contaminated with
excessive fuel water or coolant.
Through the use of the Filtakleen program savings can be
realized of 75%-80% of both usage and waste disposal costs of
oils , fluids, coolants, solvents, and factory full flow filters.
Clean oil circulating in an engine 100% of the time not only
meets but far exceeds engine manufacturers warranty
requirements.
Part Numbers
A
Product
Part No
Description
System Size
Engine Kits
FF368
FF668
FF878
FF988
Bantam duty filter kit (white)
Light duty filter kit (red)
Heavy duty filter kit (blue)
Maxi duty filter kit (blue)
8 litre sump
14 litre sump
36 litre sump
72 litre sump
Hydraulic
Oil Kits
FFHY778
FFMY788
Heavy duty filter kit
Maxi duty filter kit
900 litre tank
2000 litre tank
MX200
Mobile cleaning station
C58
C68
HYC78
MYC88
Bantam duty replacement filter
Light duty replacement filter
Heavy duty replacement filter (engines & Hydraulics)
Maxi duty replacement filter (engines & Hydraulics &
MX200)
Filter
Cartridges
B
C
By-Pass Filtration Systems
For Hydraulic Systems and Engines
Dimensions (mm)
Bantam
Light
Heavy
A
115
115
166
Maxi
213
B
200
240
275
297
C
88
88
105
127
above sizes are approximate
Part of the
Filtakleen - maximizing industrial performance world wide...
www.interlubesystems.com
UK Headquarters: Interlube Systems Ltd: St Modwen Road, Parkway Industrial Estate, Plymouth, Devon, England, PL6 8LH. Tel: +44 (0)1752 676000 Fax: +44 (0)1752 676001
Email: Info@interlubesystems.com
USA Division:
Interlube Systems Inc: 4696 Wadsworth Road, Dayton, Ohio 45414, USA Tel: (937) 2764507 Fax: (937) 2764518 Email: nmackay@interlubeusa.com
Interlube Systems (Malaysia) SDN BHD: 30, Jalan Appollo U5/189, Bandar Pinggiran Subang Sesyen, 40150 Shah Alam, Selangor, Malaysia. Tel: (603) 7845 5377 Fax: (603) 7845 5977
Email: acllube@streamyx.com
ILS_AC_001_EN1
Issue 1
"