VicVibro RWM1.010 pages
VicVibro RWM1.01
Anti-vibration wall mountings to prevent structural transmission through walls. Highly recommend to achieve structural stability of
double-leaf walls, and at the same time prevent unwanted sound transmission to adjacent rooms. These units are a must when
building walls with sizable dimension.
Advantages -Our VicVibro RWM1.01 and VicVibro RWM1.02 solutions are the only insulators on the market with the double insulation
function allowing the absorption of walls bulging and the sound pressure of the inside. They are designed so that the extension
bracket works freely in the compression of the rubber in both directions, assisting its performance in reducing vibrations. - Our
VicVibro RWM1.03 and VicVibro RWM1.04 solutions are made up of two parts: an elastic EPDM rubber cylinder and a steel bracket.
The insulator fixed to the wall with a screw that passes through the elastic component. The insulator is extremely efficient because it
absorbs compression from the inside (sound pressure) and the outside (compression caused by weight of the plasterboards...),
improving performance at low frequencies by preventing the possibility of the rubber being stretched. Installation The first unit should
be applied 1,50m from the floor. The second unit should be applied 3,00m from the floor. So on and so forth. The last unit should be
applied between 10-30cm from the acoustic ceiling. Remember that the installation of the wall mountings should be in a criss-cross
sequence (please see the installation procedure sheets).
Main Info
Ref: B00476
EAN13: 5600301841880
HS-Code: 68069000
Performance
Mounting Width: 48, 70 and 90mm
Load Weight Range: 10.00 to 45.00 Kg
Installation
Place: Wall
Steel: Yes
Fire Security Devices: Yes
Plate Thickness: 1.5 mm
Shipping
Units Per Box: 50 boxes
Box Dimensions: 323.0 x 238.0 x 143.0 mm
Box Weight: 8.6 kg