RTU-COM0 pages
BRDDERSEN
RTU-COM / Compact outstation with built-in modem
UCR-XX/RCX
INTRODUCTION
The RTU-COM unit is a compact outstation / RTU with built-in COM
device as PSTN dial-up or GSM dual band modem. The unit has data
logging facilities and is designed for use in the industrial environment.
The unit is designed in a very compact 162 mm wide module for DIN-
rail mounting (35 mm symmetrical ). Dimensions conform to DIN
43880 (used for circuit breakers) thus insuring easy installation in
standard installation panels and boxes widely available in the
electrical industry.
The RTU-COM can be delivered with a range of different power
supply versions including a battery/solar panel option.
Different power save options is available in the RTU-COM. When
closing down modem and analogue circuits and enter into sleep
mode the power consumption can be reduced to a minimum. All
sleep mode facilities are controlled from the application program.
The RTU-COM has up to 16 integral I/O, covering digital inputs and
outputs, and analogue inputs as process signal or temperature
sensor inputs. 2 SO counter inputs for flow meters etc. on all versions.
The unit can be programmed to perform simple control sequences
using an IEC 1131-3 (PLC) programming language. The RTU-COM
includes facilities for local data logging, the process values to be
logged are defined as part of the IEC 1131-3 application program.
Programming, setup and data transfer is achieved by using the
IOTOOL32.
In addition the RTU-COM can be programmed with the Straton for
B-CON tool providing support for the IEC1131 programming
languages Function Block and Ladder.
In the RTU-COM version with integrated GSM dual band modem the
RTU offer a simple SMS message alarm and control functions.
The Modbus RTU protocol is used for data transfer over the
communication link i.e. dial-up modem or GSM.
RTU-COM
-0123
SIM card
DIP switch
^ nut 0 1 ~
+ 0 1 2 3— CH---1--
0 0 0 0 0 0 0 0 0 0 0
Typical RTU-COM application
Modem |
RTU-COM RTU-COM
VERSIONS/ORDERING CODES
UCR-10IO/RC1 10.D1
Type
UCR
UCR I—I
Input/output
4 digital input 4DI...P1
4 digital input/4 digital output 4DIO...P1
4 dig. in./4 dig.out./2 analog in. 10IO
4DI/4DO/1AI/1 Pt100 in. ' 10IOA
8dig. in/4dig.out/4 relay out. 8DIO..P1
Options
RTU-COM (built-in modem) /RC
COMs
GSM Dual band modem 1
PSTN V32 dial-up modem 2
RS232 interface 3
Power supply
12V DC PS (not isolated) 00
Mains PS 110-240V 10
PS 24-48VDC/external PS 12V DC 30
Battery/Solar panel PS 12V DC 40
PS 24-60VDC/external PS 24V DC 50
Analogue input range (10IO type)
0-10V/0-20mA D1
4-20mA D2
0-5V D3
0-20mA D6
Analogue input range (10IOA type)
0-10V/Pt100 -50-100°C D11
4-20mA/Pt100 -50-100°C D21
0-20mA/Pt100 -50-100°C D61
Brodersen Systems A/S * Islevdalvej 187 * DK-2610 Roedovre
40113/
Denmark * Tel (+45) 4535 2627 * Fax (+45) 4535 2629
1
"