Blast 60020 pages
Cyberbond
Blast 6002
TECHNICAL DATA SHEET
BLAST 6002 speeds the curing of Apollo cyanoacrylates where low humidity levels or surface
acidity may exist. This product is also used for fillet conditions or when gap filling between
substrates. BLAST 6002 can be pre-applied to the opposite surface from the adhesive or
post applied to the adhesive joint by brush, pump sprayer, or dropper.
Physical Properties - Liquid
Base Compound
Appearance
Viscosity
Specific Gravity
Flash Point
Shelf Life
Boiling Point
Odor
Vapor Density
Isopropynol
Colorless liquid
1 cps
0.8
63°F
12 months unopened
N/D
Mild
Heavier than air
Percentage Volatiles
(by weight)
n/a
RoHS Compliant?
Yes
General Instructions
Surfaces to be bonded should be clean and dry.
Dispense a drop or drops of an Apollo cyanoacrylate to one
surface only.
Brush, spray, or wipe BLAST accelerators on surface as needed.
Can be pre-applied or post-applied to bond area. Let BLAST
evaporate if pre-applying.
NOTE: May adversely affect some plastics and other materials.
Test First.
Storage
Specifications and Approvals
None
Note
The data contained herein are furnished for information
only and are believed to be reliable. Cyberbond L.L.C.
cannot assume responsibility for the results obtained by
others over whose method Cyberbond L.L.C. does not
control. It is the user’s responsibility to determine
suitability for the product or of any production methods
mentioned herein and to adopt such precautions as may
be advisable for the protection of property and of
persons against any hazards that may be involved in the
handling and use thereof. In light of the foregoing,
Cyberbond L.L.C. specifically disclaims all warranties of
merchantability or fitness for a particular purpose arising
from sale or use of Cyberbond L.L.C. products.
Cyberbond L.L.C. specifically disclaims any liability for
consequential or incidental damages of any kind,
including loss of profits. The discussion herein of various
processes or compositions is not to be interpreted as
representation that they are free from domination of
patents owned by others or as a license under any
Cyberbond L.L.C. patents which may cover such processes
or compositions. We recommend that each prospective
user test the proposed application to determine its
suitability for the purpose intended prior to
incorporating any product or application in its
manufacturing process using the data as a guide.
Products should be stored unopened in a cool, dry place out of
direct sunlight.
Health Precautions
None
For safe handling information on this
product,consult the Material Safety Data
Sheet (MSDS)
Cyberbond, LLC
401 N Raddant Road
Werner-von-Siemens Straße 2
Batavia, IL 60510
D - 31515 Wunstorf
630.761.8900 tel
Germany
www.cyberbond1.com
Curing Performance
Cyberbond Europe GmbH
49 / 50 31 / 95 66 - 0 tel
www.cyberbond.de
The gap of the bond line will affect set speed. Smaller gaps tend
to increase the speed. Activators can be applied to improve set
speed but may also impair overall adhesive performance.
Cyberbond LLC.....
630.761.8900.....