Pointwatch (PIR9400) IR Gas Detector0 pages
SPECIFICATION DATA
PointWatch® Infrared
Hydrocarbon Gas Detector
Model PIR9400
A P PL ICAT ION S
5
The PointWatch® detector is a diffusion-based
point-type infrared gas detector approved to
provide continuous monitoring of methane gas
concentration in the range of 0 to 100% LFL.
The detector provides a 4-20 mA output signal,
WARRANTY
corresponding to the detected gas concentration.
The detector has Division and Zone explosion-proof
ratings and is suitable for use in indoor and outdoor applications.
Y ear
PointWatch is ideally suited for use in harsh environments and
where the cost of required maintenance for conventional catalytic
detectors is prohibitive. The PointWatch IR detector will perform
reliably in the presence of silicone and other catalytic poisoning
agents and can also operate in oxygen free environments or where
high background gas levels are present. There are no known
poisons that affect this technology.
The PointWatch detector is globally certified for use in Class 1,
Divisions 1 and 2, and Zones 1 and 2 hazardous areas. It is
also approved as a stand alone gas detector, and complies with
global approvals when connected to a stand-alone approved
controller for life safety. The approved Det-Tronics controllers
are the FlexVu® UD10, Infiniti® U9500, R8471, and Eagle
Quantum Premier® (EQP).
FE ATU R E S A N D B E N E FITS
•t Compliance to ANSI/ISA 12.13.01-2000 performance standard.
•t Requires no routine calibration to ensure proper operation.
•t Fail-safe operation.
•t Continuous self-test automatically indicates a fault or fouled
optics condition.
•t Unique multi-layered filtering system protects optics from dirt
and water ingress.
•t Internal heating system minimizes condensation, allowing
reliable operation through temperature extremes.
•t There are no known poisons, e.g. silicones or hydrides, that
compromise the integrity of the measurement.
•t Performs well in the presence of high concentrations or
constant background levels of hydrocarbons, and in oxygen
depleted atmospheres.
•t Standard 4–20 mA output (current source).
•t Compact, lightweight, explosion-proof housing is designed for
duty in harsh environments.
•t Standard 0 to 100% LFL detection range.
4.1t
©Detector Electronics Corporation 2011t
10/11t90-1074