Boilerblast machines0 pages

INSIDE BLASTING MACHINES

Usually water heaters are rotated and blasted with special nozzles with vertical

movement. If needed, rotating nozzles can be used.

Detection station is used for water heater size recognition to eliminate the possibility of

human error. Blast machines are specially designed and equiped with multiple outlets.

—-,_ - FERROCRTALIC d.o.o.

pQ FerroGrtali6 Sela pri Dol.Toplicah 47,8350 DolenjskeToplice, Slovenia- EU

_WJ internA™NAL TE|. +386 (Q)7 38 45 1 QA FAX. +386 {0)7 38 45

e-mail: info@ferrocrtalic.com, www.ferroECOblast.com

BUREAU VERITAS

CERTIFIED SINCE 1996

SHOT & SANDBLASTING TECHNOLOGY

INSIDE BLASTING OF WATER HEATERS

BEFORE ENAMELING

Enameling of water heaters interior is very demanding and does not allow any

mistakes or shortcuts in the technological procedure.

Therefore the preparation of surface before enameling is

extremely important.

Today washing with chemicals is not used very often. The best method is blasting

with steel grit named SHOTBLAST.

Since the water heaters are previously welded into one piece, only automated

blasting procedure can be used. Here the parameters are set before blasting.

Depending on the quantity of water heaters two types of machines are used

- ORBITAL and THROUGH-FEED.

Each time a combination of water heater rotation or nozzle rotation and controlled

nozzle movement in the heater interior is present.

FerroECOBIast®

EUROPE

www.ferroECOblast.com