Pleated cartridges0 pages

®

filtration technologies

PLEATED HIGH
FLOW SERIES FILTER
CARTRIDGES
Description
■ Depth pleated structure, combination of multiple media, high dirt
holding capacity and absolute micron rating.
■ 100% Polypropylene construction suitable for Water, Amine and
wide range of chemical solution filtration.
■ Greater filtration surface area per cartridge, high flow rate, low
delta pressure and longer service life, low filtration operating cost
and labor cost.
■ Absolute (β ratio 5,000) Retention Rating from 1 to 40 µm.
■ Inside to outside flow pattern, captures all contaminants at inside
of filter element, preventing dirt release on changing cartridge.
■ Greater filtration surface area per cartridge, longer service life,
significantly reduces the waste disposal for incinerator, more
environmental friendly.
■ Suitable for high liquid filtration, such as Cooling Water Filtration,
RO Pre-Filtration, Seawater Desalination, Amine Circulation
Filtration and all kinds of chemical solution filtration.
■ Install with HF FTP High Flow filter housing, saves space and
equipment cost.
■ Manufacture in Class 10,000 clean room environment.

Specifications
■ Retention Rating: 1, 3, 5, 10, 20, 40 µm Absolute.
■ Recommended Operating Flow Rate:

40” (1,016 mm) 50 m3/hr.
60” (1,524 mm) 70 m3/hr.

■ Dimensions:
- Outer Dimension: 6” (152 mm).
- Length: 40” (1,016 mm), 60” (1,524 mm).
■ Material of Construction:
- Filter Media: Depth Type Multimedia Polypropylene.
- Core/Cage: Polypropylene.
- O-Ring: EPDM, VITON, Silicone, Teflon Encapsulated.
■ Operating Conditions:
- Max. Operating Temperature: 60 ºC (140 ºF).
- Recommended Change-out Differential Pressure:
2.1 bar a 20 ºC.