Series 9000 Density Classifiers Spec Sheet0 pages

Series 9000

Density Classifiers Spec Sheet
• FLAT BOTTOM DENSITY CLASSIFIERS
– Tank – rubber lined, all welded formed steel plate
construction
– Central feed (stilling) well – rubber lined with impact plate
& support frame
– Full circumference, rubber lined overflow collection flume
with ANSI flange discharge outlet
– Bolt-on water injection plenum/teeter chamber complete
with ANSI flange connection, diffuser plate water
distribution system with multiple rubber one-way water
nozzles, manual teeter water control valve and mag flow
meter
– Multiple manual knife gate isolation valves and pneumatic
pinch type discharge valves
– Underflow discharge control system consisting of a density
probe mounted on an adjustable bracket near the overflow
of the tank which controls solenoid valves to open/close
the discharge valves. All controls including density set
point adjustment and monitoring are housed in a NEMA 4
enclosure (Note – the enclosure ships loose for field
installation on the unit or adjacent structure)

APPROX. LOADING CAPACITIES
Lignite / Charcoal Removal from -250 µm
(~#60 mesh) Sand
Model

Size Classification
~ 500 µm (~#35 mesh)

Typ. Feed Rate
(stph)

Approx. Teeter Water
Requirements (gpm)
@ 40-50 psi

Typ. Feed Rate
(stph)

Approx. Teeter Water
Requirements (gpm)
@ 40-50 psi

DC 3.0

1–8

60

10 – 14

138

DC 4.0

8 – 10

90

14 – 22

198

DC 5.0

10 – 20

130

22 – 30

310

DC 6.0

20 – 24

200

30 – 50

446

DC 6.5

24 – 35

240

50 – 70

551

DC 8.0

35 – 42

360

70 – 90

793

DC 9.8

56 – 68

580

110 – 150

1281

DC 11.5
68 – 95
750
150 – A KOLBERG EQUIPMENT SPECIALIST
1687
FOR MORE INFORMATION CALL 1-800-542-9311 AND ASK FOR 190
DC 13.0

95 – 115

980

190 – 260

2203

NOTE: Specifications are Capacities provided are estimates only and are based on a material S.G. of 2.70.
subject to change without notice.
Because KPI-JCI may use in its catalog & literature, field photographs of its products which may have been modified by the owners, products furnished by KPI-JCI may not necessarily be as illustrated therein. Also continuous design progress makes it necessary that specifications
be subject to change without notice. All sales of the products of KPI-JCI are subject to the provisions of its standard warranty. KPI-JCI does not warrant or represent that its products meet any federal, state, or local statutes, codes, ordinances, rules, standards or other regulations,
including OSHA and MSHA, covering safety, pollution, electrical wiring, etc. Compliance with these statutes and regulations is the responsibility of the user and will be dependent upon the area and the use to which the product is put by the user. In some photographs, guards may have
been removed for illustrative purposes only. This equipment should not be operated without all guards attached in their normal position. Placement of guards and other safety equipment is often dependent upon the area and how the product is used. A safety study should be made by
the user of the application, and, if required additional guards, warning signs and other safety devices should be installed by the user, wherever appropriate before operating the products.

Consult factory for specific applications

700 W 21st. St., Yankton, SD 57078
1-800-542-9311 Fax: 605-665-8858

Email: mail@kpijci.com
www.kpijci.com