ACFF-FP - Constant flow filter with flow cartridge 0 pages
AMCA CONSTANT FLOW FILTER Series FP
With flow cartridge
Nominal working pressure (inlet) 350 bar (5000 psi)
Nominal flow rate 2, 4, 6 and 8 l/min
(0.5, 1.0, 1.6 and 2.1 USgpm)
Filtration rating 3 200
Filter element max. work pressure 2.5 bar (35.7 psi)
Filter housing max. work pressure 5 bar (71.5 psi)
Mounting position Vertical
Size working port (inlet) 1/4 BSP
Size working port (outlet) 3/8 BSP
By-pass setting 2.0 bar (28.6 psi)
Max. fluid temperature + 80C (+ 176F)
Viscosity range 10…500cSt
Indicator Pressure gauge 2.5 bar (35.7 psi)
Media AMCA-ACFF-3
TECHNICAL DATA
AMCA CONSTANT FLOW FILTERS
PERFORM BETTER
In real conditions some filter elements tend to perform not
as well as evaluated through a multipass test.
Variable flow rate and vibration show an unacceptable
drop in removal efficiency (â-rating) and dirtcapacity.
Clouds of contamination, downstream the filter, could
result in component failure.
AMCA CONSTANT FLOW FILTERS (ACFF) ensure
that hydraulic fluid continually circulates through the filter
elements at a constant flow rate. Thus meeting the
steady state conditions of the multipass test and keeping
the system clean at all time.
The AMCA-ACFF-3 element offers the following benefits:
* Due to the removal of the metal parts of the elements, the disposal weight will be reduced
by more than 50%.
* The remaining oil in the element can be removed by means of simple pressing sequence.
This will reduce the disposal costs even more.
* The metal re-useable sleeve is made from durable materials.
* The elements are equipped with a silicone bottom in order to prevent dirt being flushed
back during element change.
* The elements are equipped with the glass fibre media with filtration finenesses of 1 or 3
micron.
Publ. L-ACFF-FP-E-11/02
AMCA Hydraulic Fluid Power BV