BetaGauge 330 Hand Held Pressure Calibrator0 pages
Calibration Technology Starts Here
Martel Electronics Corporation introduces a revolution in pressure
calibration technology for the process industries. With the release of its new
BetaGauge 330, technicians will have a small, lightweight hand held calibrator that
generates pressures up to 150 PSIG using a high performance integral electric pump.
Before the BetaGauge 330, users had to manually generate pressures with tedious and hard to use
manual pumps or use large, heavy and unwieldy boxes with limited portability and limited battery life.
The BetaGauge 330 has a form factor only slightly larger than Martel’s popular BetaGauge 321 and weighs in
at a mere 2.5 pounds. The housing is contoured to easily fit a technician’s hand with good balance top to bottom.
Performance doesn’t stop with the pump. The BetaGauge 330 provides ±0.025% of full scale accuracy on its
internal, isolated pressure sensor. Temperature compensation on its internal sensor ensures accuracy in field
applications. An external pressure module connection supports all 29 ranges of BetaPort-P pressure modules for
even greater measurement capability
Continued on back.
.General Features Integrated internal electrically operated pneumatic pump:
generates pressure to 150 PSI and vacuum to -12 PSI
.(-1 to 10 Bar, -10 to 100 kPa) .Accuracy to 0.025% FS .Source/measure 4-20 mA Small, rugged compact design operates on eight (8)
standard Alkaline AA batteries
- Only 8” high x 4” wide x 2-3/8” deep (20 cm x 10 cm x 6 cm)
.- Lightweight at just 2.5 pounds (1.2 kg) External pressure module interface supports all
29 BetaPort-P compatible pressure modules (requires
.optional BPPA-100 module adapter) Pt100 RTD input for temperature measurement, accurate to
.0.1°C (0.2°F) (measurement only) .24 V loop power to power device under test .Store and recall up to 5 user defined setups Large graphic style LCD with backlight can be configured
to display up to 3 variables displayed simultaneously
.(user controlled) .Ideal for gas flow calibration (custody transfer) applications .Pressure displayed in the user’s choice of 19 engineering units Switch test is automatic using internal sensor or external
.pressure module .IP56 Rated Percent error function
For more information:
- Call us toll free at 800-821-0023 or 603-434-1433
- Fax us at 603-434-1653
- Email us at sales@martelcorp.com
and ask for a BetaGauge 330 Pressure brochure
- Or go to our website, www.martelcalibrators.com
and click on BetaGauge 330
Hand Held Pressure Calibrator with
Integral Electric Pressure Pump BetaGauge 330
The new
standard
of pressure
calibration
Patent
Pending