MAXQ611 Infrared Remote Control System-On-Chip0 pages
MAXQ611
Infrared Remote Control System-On-Chip
General Description
The MAXQ611 is a low-power, 16-bit MAXQ® microcontroller designed for low-power applications including
universal remote controls, consumer electronics, and
white goods. The device combines a powerful 16-bit RISC
microcontroller and integrated peripherals including a
universal synchronous/asynchronous receiver-transmitter
(USART), SPI master/slave and I2C communications
ports, along with an IR module with carrier frequency
generation and flexible port I/O capable of multiplexed
keypad control. An internal amplifier eliminates the need
for external circuitry to drive the IR receiver pin.
The device provides 80KB of flash memory and 2KB of
data SRAM.
For the ultimate in low-power battery-operated performance, the device includes an ultra-low-power stop mode.
In this mode, the minimum amount of circuitry is powered.
Wake-up sources include external interrupts, the power-fail
interrupt, and a timer interrupt.
Applications
●● Universal Remote Controls for Tablets
●● Universal Remote Controls for Smartphones
Block Diagram
MAXQ611
REGULATOR
16-BIT MAXQ
RISC CPU
IR DRIVER
VOLTAGE
MONITOR
CLOCK
80KB FLASH
MEMORY
IR TIMER
GPIO
I2C
WATCHDOG
UTILITY
ROM
SPI
2x
16-BIT TIMER
8kHz NANO
RING
2KB
DATA SRAM
USART
MAXQ is a registered trademark of Maxim Integrated Products,
Inc.
19-7309; Rev 0; 3/14
Features
●● High-Performance, Low-Power, 16-Bit RISC Core
●● Internal 12MHz Oscillator Requires No External
Components
●● 1.7V to 3.6V Operating Voltage
●● Dedicated Pointer for Direct Read from Code Space
●● 16-Bit Instruction Word, 16-Bit Data Bus
●● Memory Features
•t 80KB Flash Memory
•t 2KB Data SRAM
●● Infrared Module Features
•t IR Learning Circuit
•t Automatic IR Carrier Frequency Generation
t and Modulation
•t IR Transmit Driver with 200mA (min) Sink Current
t at 1.8V
●● Additional Peripherals
•t Power-Fail Warning
•t Power-On Reset (POR)/Brownout Reset
•t Two 16-Bit Programmable Timers/Counters
t with Prescaler and Capture/Compare
•t SPI, I2C, and USART Peripherals
•t Programmable Watchdog Timer
•t 8kHz Nanopower Ring Oscillator Wake-Up Timer
•t Up to 32 (TQFN) or 38 (Bare Die) GPIO
●● t Low Power Consumption
•t
0.15µA (typ), 2.0µA (max) in Stop Mode,
tTA = +25NC, Power-Fail Monitor Disabled
•t
2.0mA (typ) at 12MHz in Active Mode
Ordering Information/Selector Guide appears at end of
data sheet.
For documentation and recommended products to use with this part,
refer to www.maximintegrated.com/MAXQ611.resources.
For related parts, refer to www.maximintegrated.com/MAXQ611.related.
Note: Some revisions of this device may incorporate deviations from
published specifications known as errata. Multiple revisions of any
device may be simultaneously available through various sales channels.
For information about device errata, go to: www.maximintegrated.
com/errata.