Shafts -Both Ends Threaded Hollow Shafts-0 pages
I Please refer to website for current pricing.
nnnnShafts
nnnn-Both Ends Threaded Hollow Shafts-
nnnnType | □Material | EjHardness | 0Surface Treatment |
SPJM | 52100 Bearing Steel | Induction Hardening Effective Hardened DepthErRIM 58HRC- | |
PSPJM | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness 5u or more | ||
RSPJM | Low Temperature Black Chrome Plating |
M(Coarse Thread)=P
nnnnFeatures of Low Temperature Black Chrome Plating^g=R11S
nnnnChanges in circularity, straightness, perpendicularity, wall thickness deviations and hardnessEs R103-S=R184
nnnnLow temperature black chrome plating is not applied to the inside of hollow shafts, taps, bored holes and lateral holes, and nay rust
nnnnpShaft End Machined Area (Effective Thread Length + approx. 10mm)
nnnnhardness may be reduced by annealing.
nnnn® About hollow shaft wall thickness devia1ions.BirR184
nnnnPart Number | 1mm Increments | P/Q | d | (Y) Max. | R | C | ||||
Type | Dg6 | L | F/T | B/S | ||||||
SPJM PSPJM RSPJM (D<30, L<500) | 6 | -0.004 -0.01 2 | 25- 596 | 2<F<Px5 2<T<Qx5 | BSF-2 (When P<6) BSF-3 (When P=8/10)1 BSF-5 (WhenP<12) B=0 (When without threads) SST-2 (When Q<6) SST-3 (Q-8 /1 SST-5 (WhenQ>12) S-0 (When without threads) | 2 | 600 | 0.3 or less | 0.5 or less | |
8 | -0.005 -0.014 | 25- 796 | 8 | 3 | 800 | |||||
10 | 25- 796 | 8 10 | 4 | |||||||
12 | -0.006 -0.017 | 25- 996 | 10 12 | 6 | 1000 | |||||
13 | 25- 996 | 12 | 7 | |||||||
16 | 25-1196 | 16 | 10 | 1200 | ||||||
20 | -0.007 -0.020 | 25-1196 | 20 | 14 | 1.0 or less | |||||
25 | 25-1196 | 24 | 16 | |||||||
30 | 25-1496 | 24 30 | 17 | 1500 | ||||||
35 | -0.009 -0.025 | 25-1496 | 30 | 19 | 0.5 or less | |||||
40 | 25-1496 | 30 | 20 |
®When D=P or D=Q, please specify F=B (T=S) as B (S) dimensions. However
nnnn(J)When B=0 or S=0, no thread machining will be performed. (f)B and
nnnn| Part Number| - |T]-|T]-[B]-rp~|-pr]-[s]-[Q]
nnnnBfcl SPJM20 - 400 - F20 - B20 - P20 - T20 - S20 - Q20
nnnnthe manufacturing processes will prioritize L, F and T dimensions, and B (S) dimension will be F (T)-(Pitch x 2).
nnnnS > Pitch x 3 is required
nnnnPart Number| - 0- |^-|^-[^-[T]-[S]-[Q]- (DKC / LKC.etc.)
nnnnSPJM30 - 300 - F40 - B30 - P24 - T50 - S40 - Q24 - DKC
nnnnPSPJM / SPJM ** Dia. 6 - 30 *
nnnnexpress A $8.00/piece
nnnn11 Days
nnnnNon-Return able P.:
nnnnPSPJM / SPJM ** Dia. 35,40 **
nnnnQ | Days 1Express A | $8.00/piece
nnnnNon-Returnable R88
nnnnAlterations
nnnn■Volume Discount Rate | |
Quantity 11 I 2-4 5-19 I 20- | For larger quantity orders "Daystc Ship" may differ from oublishec ;atalog term.B^ R87 |
Discount Rates| Price List | 5% 10% | 15% |
Code
nnnnLow Temp Black Chrome Plating Additional Price | D | Additional Price | ||||||
Mini-SO | U1.10O | |||||||
11.20 | 11.30 | 11.50 | 11.50 | 13.60 | 14.00 | 16.10 | ||
8 | 11.20 | 11.40 | 13.40 | 13.40 | 15.70 | 17.60 | 19.80 | |
11.3(1 | 13.10 | 13.40 | 16.90 | 19.00 | 21.00 | 23.00 | ||
13.0(1 | 15.00 | 17.00 | 19.00 | 22.90 | 26.90 | 30.80 | ||
13.1(1 | 15.00 | 17.00 | 20.50 | 24.50 | 28.40 | 32.40 | ||
14.8(1 | 18.60 | 20.50 | 27.80 | 33.50 | 39.40 | 45.00 | ||
20 | 18.4(1 | 23.90 | 27.70 | 36.80 | 46.10 | 47.30 | 56.80 | |
21.80 | 31.20 | 38.60 | 45.20 | 57.80 | 69.10 | 73.30 | ||
29.80 | 43.80 | 47.30 | 65.80 | 76.10 | 92.70 | 109.50 |
Spec.
nnnn(*)For Low Temp Chrome Plated Shafts, the non-plated shaft unit prices below
nnnnEX.) RSPJM20-400-F20—28.30+47.30=$75.60
nnnn^Features of Low Temperature Black Chrome Rati ngBlfR 118
nnnnRevise O.D. Tolerance (Precision Grade)
nnnnDKC
nnnnOuter diameter tolerance
nnnnis altered to h5.
nnnn| Ordering Code | DKC
nnnn<3>Low Temperature
nnnnBlack Chrome Plating is
nnnnnot applicable.
nnnn4.00
nnnnAlteration to L Dimension Tolerance
nnnnLKC
nnnnChanges "LTolerance".
nnnnLI '
nnnn®L<200—► L±0.03
nnnn200<L<500
nnnn•••►L±0.05
nnnnL>500-r L±0.1
nnnn®When D-P (Q)<2
nnnn®When using LKC,
nnnnL dimensions can be
nnnnspecified in 0.1mm
nnnnincrements.
nnnn4.00
nnnn(f)Alterations may lower hardness.B£ R104
nnnnWrench Flats
nnnnSC
nnnnAdds a wrench flat.
nnnnOrdering Code SC5
nnnn®SC=1 mm Increment
nnnn®SC+£1<L
nnnnSC=0 or SC>1
nnnn4.00
nnnnAdd Wrench Fiatsat Two Locatbns
nnnnwmn<i
nnnnwsc
nnnnTwo wrench flats.
nnnn| Urdermg Code | WSC1 2-X8
nnnnSpecifyWSQX in 1mrn increments.
nnnnWSC+X+£ix2<L
nnnnWSC=0orWSC>1
nnnnX = 0orX> 1
nnnnTwo wrench flats will not be
nnnnpositioned in a coplanar relationship.
nnnns.oo
nnnnPart Number | Unit Price | ||||||||||||
Type | D | Min. L - 50 | L51-100 | L101-150 | L151-200 | L201-300 | L301-400 | L401-500 | L501-600 | L601-800 | L801-1000 | L1001-1200 | L1201-1496 |
SPJM RSPJM 3rice in th is t abl e + 3rice in the table above | 6 | 9.50 | 11.40 | 13.60 | 15.60 | 20.50 | 25.60 | 30.70 | 35.50 | ||||
8 | 9.80 | 12.00 | 14.30 | 16.30 | 21.80 | 27.20 | 32.60 | 38.20 | 50.80 | ||||
10 | 9.00 | 10.90 | 12.70 | 14.40 | 19.00 | 23.50 | 28.00 | 32.50 | 41.60 | ||||
12 | 10.60 | 13.20 | 15.70 | 18.50 | 24.80 | 31.10 | 37.40 | 43.80 | 56.00 | 69.60 | |||
13 | 9.70 | 11.80 | 13.90 | 16.00 | 21.50 | 26.80 | 32.00 | 37.40 | 57.60 | 68.40 | |||
16 | 10.00 | 12.20 | 14.40 | 16.80 | 22.30 | 27.80 | 33.40 | 38.90 | 59.40 | 70.80 | 83.20 | ||
20 | 10.20 | 12.50 | 14.60 | 17.00 | 22.70 | 28.30 | 34.10 | 40.00 | 60.60 | 71.90 | 83.50 | ||
25 | 7.70 | 13.90 | 16.80 | 19.70 | 26.80 | 34.00 | 40.90 | 48.10 | 71.90 | 86.00 | 100.20 | ||
30 | 10.00 | 17.70 | 21.70 | 25.70 | 35.80 | 45.50 | 55.40 | 65.40 | 95.40 | 115.30 | 135.50 | 168.00 | |
35 | 12.00 | 20.80 | 25.70 | 30.70 | 43.00 | 55.40 | 67.90 | 80.20 | 115.30 | 140.10 | 165.40 | 205.10 | |
40 | 14.70 | 25.10 | 31.50 | 37.70 | 54.00 | 69.70 | 85.50 | 101.30 | 143.80 | 176.20 | 207.90 | 258.30 | |
PSPJM | 6 | 10.70 | 13.30 | 16.00 | 18.60 | 25.30 | 31.70 | 38.20 | 44.60 | ||||
8 | 11.30 | 13.90 | 16.80 | 19.70 | 26.50 | 33.70 | 40.80 | 48.00 | 64.20 | ||||
10 | 10.20 | 12.50 | 14.80 | 17.00 | 23.20 | 29.00 | 34.80 | 40.70 | 52.40 | ||||
12 | 12.10 | 15.60 | 18.80 | 22.20 | 30.60 | 38.60 | 47.00 | 55.30 | 71.90 | 88.80 | |||
13 | 10.60 | 13.20 | 15.70 | 18.50 | 25.00 | 31.30 | 37.80 | 44.30 | 68.50 | 81.40 | |||
16 | 10.90 | 13.60 | 16.20 | 19.00 | 25.80 | 32.60 | 39.40 | 46.00 | 71.00 | 84.40 | 99.50 | ||
20 | 11.00 | 13.70 | 16.70 | 19.30 | 26.20 | 33.00 | 40.10 | 47.00 | 72.20 | 86.00 | 100.00 | ||
25 | 8.80 | 15.70 | 19.20 | 22.60 | 31.30 | 40.00 | 48.50 | 57.10 | 85.90 | 102.80 | 120.40 | ||
30 | 11.60 | 20.20 | 25.10 | 29.90 | 41.90 | 54.00 | 65.90 | 77.90 | 114.30 | 138.30 | 163.00 | 202.20 | |
35 | 13.90 | 23.80 | 29.90 | 35.80 | 51.00 | 65.90 | 81.00 | 95.80 | 138.30 | 168.60 | 198.50 | 247.00 | |
40 | 17.30 | 29.00 | 36.90 | 44.60 | 63.80 | 83.20 | 102.40 | 121.60 | 172.90 | 212.20 | 250.30 | 311.60 |
187
nnnnType | □Material | 0Hardness | □Surface Treatment |
SPJD | 52100 Bearing Steel | Induction Hardening Effective Hardened DepthETRIM 58HRC- | |
PSPJD | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness 5u or more | ||
RSPJD | Low Temperature Black Chrome Plating |
No Surface Treatment on
nnnnmachined areas
nnnnFeatures of Low Temperature Black Chrome Plating^g=R11S
nnnn^Changes in circularity, straightness, perpendicularity, wall thickness deviations and hardnessETR103-yirR 184
nnnnfiLow temperature black chrome plating is not applied to the inside of hollow shafts, taps, bored holes and lateral holes, and may rust.
nnnnf)Shaft End Machined Area (Effective Thread Length + approx. 10mm)
nnnnhardness may be reduced by annealing.
nnnn® About hollow shaft wall thickness deviations.BirR184
nnnnPart Number | 1mm increments | P | N (Coarse) | d | (Y) Max. | R | C | ||||
Type | Dg6 | L | F | B | |||||||
SPJD PSPJD RSPJD (D<30, L<500) | 6 | -0.004 -0.01 2 | 25- 598 | 2<F<Px5 | B<F-2 (When P<6) B<F-3 pen P-8/10)1 B<F-5 (WhenP<12) B=0 (When without threads) ®B>Pitchx3 | 2 | 600 | 0.5 or less 1.0 or less | |||
8 | -0.005 -0.014 | 25- 798 | 8 | 4 5 | 3 | 800 | 0.3 or less | ||||
10 | 25- 798 | 8 10 | 5 6 | 4 | |||||||
12 | -0.006 -0.017 | 25- 998 | 10 12 | T1(RC1/8) | 6 | 1000 | |||||
13 | 25- 998 | 12 | T1(RC1/8) | 7 | |||||||
16 | 25-1198 | 16 | T2(RC1/4) | 10 | 1200 | ||||||
20 | -0.007 -0.020 | 25-1198 | 20 | T3(RC3/8) | 14 | ||||||
25 | 25-1198 | 24 | 20 | 16 | |||||||
30 | 25-1498 | 24 30 | 20 | 17 | 1500 | ||||||
35 | -0.009 -0.025 | 25-1498 | 30 | 24 | 19 | 0.S | |||||
40 | 25-1498 | 30 | 24 30 | 20 |
®When D=P, please specify F=B as B dimensions. L and F dimensions, however, have priority to build, thus B dimensions should be F-(Pitch x 2).
nnnn(f)Thread machining will not be applied when B = 0 is specified.(J)0verall length L requires Nx3<L
nnnn| Part Number] - |T] - [7] - fi] - |~P~| - |~N~]
nnnn"P1 SPJD20 - 277 - F12 - B12 - P20 - N16
nnnnj J"j| | Part Number] - |~L~| - - |~B~| - |~P~| - |~N~| - (DKC/LKC/SC
nnnnIQH. I in inn ran oon nu M<VI ni/r1
nnnn250 - F40 - B30 - P24 - N20
nnnnPSPJD / SPJD ** Dia. 6 - 30 ** _
nnnnNon-Returnable R88
nnnnPSPJD / SPJD ** Dia. 35,40 ** _
nnnnNon-Returnable R88
nnnnRSPJD
nnnn11 | Days
nnnnNon-Returnable R6
nnnnAlterations
nnnn■Volume Discount Rate | |
Quantity 1 2-4 5-19 20- | hor larger quantity orders Day; to Ship" may differ from publishe catalog termer R87 |
Discouit Rates| Price List 5% | 10% | 15% |
Code
nnnnLow Temp Black Chrome Plating Additional Price | D | Additional Price | ||||||
L51.100 | ||||||||
13.20 | 13.20 | 13.40 | 13.40 | 14.60 | 15.80 | 16.90 | ||
8 | 13.20 | 13.20 | 14.30 | 15.40 | 16.40 | 18.70 | 20.80 | |
13.20 | 14.20 | 15.10 | 16.90 | 19.90 | 22.10 | 24.00 | ||
12 | 14.00 | 16.00 | 18.00 | 20.00 | 23.00 | 27.00 | 30.80 | |
14.20 | 16.00 | 18.00 | 20.80 | 24.60 | 28.40 | 32.30 | ||
16.00 | 18.70 | 21.50 | 26.20 | 32.80 | 38.40 | 44.00 | ||
17.80 | 23.30 | 27.80 | 34.30 | 43.60 | 48.70 | 54.00 | ||
22.10 | 29.60 | 37.00 | 43.90 | 53.50 | 65.50 | 73.10 | ||
30 | 28.90 | 40.00 | 47.70 | 58.80 | 73.20 | 86.60 | 103.20 |
Spec.
nnnn(*)For Low Temp Chrome Plated Shafts, the non-plated shaft unit prices below
nnnnEX.) RSPJD20-277-F12—19.40+43.60=$63.00
nnnn^Features of Low Temperature Black Chrome PlatingBir R118
nnnne Adder
nnnnRevise O.D. Tolerance (Precision &ade)
nnnnDKC
nnnnOuter diameter tolerance
nnnnis altered to h5.
nnnn<3>Low Temperature
nnnnBlack Chrome Plating is
nnnnnot applicable.
nnnn4.00
nnnnAlteration to L Dimension Tolerance
nnnnLKC
nnnnChanges "LTolerance".
nnnnOrdenrig tode LKC
nnnn®L<200-r L±0.03
nnnn200<L<500
nnnnL±0.05
nnnnL>500-> L±0.1
nnnn®When D-P (Q)<2
nnnn®When using LKC, L
nnnndimensions can be specified in
nnnn0.1mm increments.
nnnn4.00
nnnnWrench Flats
nnnn□031
nnnnSC
nnnnAdds a wrench flat.
nnnn| Ordering Code | SC5
nnnn®SC=1mm Increment
nnnn®SC+ft<L
nnnnSC=0 or SC>1
nnnn®When D<25
nnnnSC+£i<L-Nx2
nnnn4.00
nnnnAdd Wrench Flats at Two Locations
nnnnWSC
nnnnSpecify WSCfflinlmrn
nnnn(J>WSC+X+£lx2<L
nnnnWSC=0 orWSC>1
nnnnWhen D<25,X>NX2
nnnnWhen D<30,X=0 or X>1
nnnnTwo wrench flats will not be
nnnnpositioned in a coplanar relationship.
nnnnW
nnnnS.OO
nnnn(^Alterations may lower hardness.BE R104
nnnnPart Number | Unit Price | ||||||||||||
Type | D | Min. L - 50 | L51-100 | L101-150 | L151-200 | L201-300 | L301-400 | L401-500 | L501-600 | L601-800 | L801-1000 | L1001-1200 | |
SPJD RSPJD ^rice in this table + ^rice in the table above | 6 | 8.20 | 9.80 | 11.50 | 13.40 | 17.60 | 22.00 | 26.40 | 30.50 | ||||
8 | 8.40 | 10.30 | 12.20 | 14.00 | 18.70 | 23.30 | 28.00 | 32.60 | 43.60 | ||||
10 | 7.70 | 9.20 | 10.90 | 12.40 | 16.30 | 20.20 | 24.00 | 27.80 | 35.60 | ||||
12 | 9.10 | 11.30 | 13.60 | 15.70 | 21.20 | 26.60 | 32.20 | 37.60 | 48.10 | 59.60 | |||
13 | 8.30 | 10.20 | 11.90 | 13.70 | 18.40 | 22.90 | 27.50 | 32.20 | 49.30 | 58.60 | |||
16 | 8.50 | 10.40 | 12.40 | 14.40 | 19.20 | 23.90 | 28.70 | 33.20 | 51.00 | 60.70 | 71.30 | ||
20 | 8.60 | 10.60 | 12.50 | 14.60 | 19.40 | 24.20 | 29.30 | 34.20 | 52.00 | 61.70 | 71.50 | ||
25 | 6.60 | 11.90 | 14.40 | 16.80 | 22.90 | 29.00 | 35.20 | 41.30 | 61.60 | 73.80 | 85.90 | ||
30 | 8.60 | 15.20 | 18.50 | 22.00 | 30.70 | 39.10 | 47.50 | 56.00 | 81.60 | 98.90 | 116.10 | 143.90 | |
35 | 10.30 | 17.80 | 22.00 | 26.30 | 36.90 | 47.50 | 58.10 | 68.80 | 98.90 | 120.10 | 141.60 | 175.80 | |
40 | 12.60 | 21.60 | 26.90 | 32.20 | 46.30 | 59.80 | 73.20 | 86.80 | 123.40 | 151.10 | 178.20 | 221.40 | |
PSPJD | 6 | 9.20 | 11.40 | 13.70 | 16.00 | 21.60 | 27.10 | 32.60 | 38.30 | ||||
8 | 9.60 | 11.90 | 14.40 | 16.80 | 22.80 | 28.90 | 35.00 | 41.00 | 55.00 | ||||
10 | 8.60 | 10.80 | 12.70 | 14.60 | 19.90 | 24.80 | 29.80 | 34.90 | 44.90 | ||||
12 | 10.30 | 13.40 | 16.10 | 19.00 | 26.20 | 33.10 | 40.30 | 47.40 | 61.70 | 76.10 | |||
13 | 9.10 | 11.30 | 13.60 | 15.70 | 21.40 | 26.80 | 32.40 | 38.00 | 58.80 | 69.70 | |||
16 | 9.20 | 11.50 | 13.80 | 16.20 | 22.20 | 28.00 | 33.70 | 39.50 | 61.00 | 72.40 | 85.30 | ||
20 | 9.50 | 11.80 | 14.30 | 16.70 | 22.40 | 28.30 | 34.30 | 40.30 | 62.00 | 73.80 | 79.80 | ||
25 | 7.60 | 13.60 | 16.40 | 19.30 | 26.80 | 34.20 | 41.60 | 49.10 | 73.70 | 88.10 | 103.20 | ||
30 | 10.00 | 17.30 | 21.60 | 25.50 | 35.90 | 46.30 | 56.40 | 66.70 | 98.00 | 118.60 | 139.80 | 173.30 | |
35 | 12.00 | 20.40 | 25.50 | 30.70 | 43.70 | 56.40 | 69.40 | 82.20 | 118.60 | 144.60 | 170.20 | 211.80 | |
40 | 14.80 | 24.80 | 31.60 | 38.10 | 54.70 | 71.40 | 87.80 | 104.10 | 148.20 | 181.90 | 214.60 | 267.00 |