OMEC 650-A A USER-FRIENDLY SYSTEM FOR FIXED-PITCH MILLING MACHINES0 pages
OMEC
Technical sheets
OMEC 650-A
A USER-FRIENDLY SYSTEM
FOR FIXED-PITCH
MILLING MACHINES
allows Omec to offer a machine with virtually the
same size as its mechanical version.
Despite being a fixed-pitch machine, you can
choose two different pitches: 25mm and 50mm.
After designing the CNC-operated variable pitch
milling machines, Omec is starting the renovation
of its range of fixed-pitch milling machines.
The first machine that has been designed is the
electronic version of the manual 650M milling
machine.
This milling machine is very easy to use. To
change the size of the work-piece, you don’t need
to move the stroke-pieces on the machine top to
find the right position. Vertical stroke-pieces
(where normally sides are machined) are stationary, whereas horizontal stroke-pieces are assisted
by two position blocks that adjust the right offset
between the vertical work-piece and the horizontal
work-piece. By moving the horizontal strokepieces towards the outer blocks, the machining
position for the 25mm pitch is obtained, whereas
by moving them towards the inner blocks, the
machining position for the 50mm pitch is
achieved.
Starting from the base of the manual milling machine, the electronic one has been fitted with a
small CNC system with two axes and a centric
spindle that uses the same milling cutters with two
sharp sides that are fitted on the high-range milling machines.
The mechanical design of this machine has been
improved and the use of suitable components
The CNC system also allows operators to move
the position of joints on the work-piece by increasing or decreasing the distance of the first joint