Optically Coupled Isolator0 pages
15 kV electrical isolation Choice of phototransistor or photodarington output Hermetically sealed LED and photosensor Base contact for conventional transistor biasing (OP120 only) UL recognized File No. E58730
nn* Wide operating temperature range Product Photo Here
nnDescription:
nnEach Optoisolator in this data sheet contains an infrared Light Emitting Diode (LED) and a NPN silicon Photosensor. The OPI120 has an 890 nm Light Emitting Diode (LED) and NPN phototransistor sensor, whereas the OP123 has a 890 nm LED and a photodarlington sensor. The devices are sealed in a precast opaque housing with a optically transmissive path between the LED and the photosensor. The Optoisolators in this data sheet are UL approved under E 58730. This series is designed for transmission of information between one power supply voltage to another where the potentials during surge conditions are not greater than the guaranteed isolation voltage. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. TX and TXV processing is available. For more information, contact your local representative or OPTEK.
nnApplications:
nnOrdering InformationHigh voltage isolation between input and output >
CE PartNumber LED Peak Wavelength SensorIsolation Voltage (,000)CTRMinI >
F (mA) Typ / Max V (Volts) MaxLeadLength / Spacing OPI120 Electrical isolation in dirty environments Industrial equipment 890 nmor935 nmTransistor152010 / 5025 Medical equipment OPI123 Darlington 50 20 0.40" /0.75" Office equipment >
RoHS
nnOPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.comIssue A .2 04/08 Page 1 of 3 size="-1">
"