Ceramic Pellet Igniters0 pages

CERAMIC IGNITER
HIGH-TEMPERATURE HEATING ELEMENTS
Our ceramic heating elements consist of Al2O3 insulation ceramics with an integrated W conductor,and
reach a permanent operation temperature of between 900°C and 1100°C.

They are deployed in the following areas
1.Heating applications above 750°C,in which standard heating cartridges would have long since failed.
2.Very precise,rapid heating due to the extremely low thermal mass
3.Efficient hot gas generation through the extremely large heat transfer surface area.
Our heater portfolio covers a broad performance spectrum(depending on the desired purpose)and various
patented structural forms.In addition to this the heating elements can be designed on an individual
customer basis and be equipped with a complete electrical connection technology.
Concrete applications:
●Hot surface igniters(ignition of gas,oil ,biomass,pellets)
●Hot air generation
●Tool heating
●Melting/Welting/Soldering/Hot air soldering
●Heaters for chemical analysis and laboratory equipment(eg:min-furnaces,reactors)
●Customer-specific heating solutions

Production Technology----High Temperature Co Fired Ceramics
(HTCC)
HTCC is an acronym for High-temperature co-fired ceramics; HTCC ceramic heating element is made up of
high melting point metal heating material such as tungsten, molybdenum or molybdenum – manganese and
92-96% alumina ceramic substrates. The metal heating resistance slurry is printed onto the tape casting
ceramic green body according to the design requirement, several layers of ceramic green body are then
laminated together and is fired at 1500 ~ 1600 ℃ high temperature, with the aid of 4-8% sintering additive,
to form the alumina ceramic heating element.

WWW.INNOVACERA.COM