Maxima PLUS MRP series0 pages

DOSING PUMP

Maxima PLUS MRP SERIES- Solenoid dosing pump
Technical characteristics
Flow rates: from 8 to 25 l/h
Max back pressure: up to 14 bar
Power supply:
100÷240 Vac - 50/60 Hz
Stroke frequency: 300 strokes/minute
Electronic stroke length regulation: from 30 to 100%
Pump head:
PVDF
Diaphragm: PTFE
External Enclosure: PP reinforced with fiber glass
protection degree IP65
Manually priming valve
Installation kit: Included
Seko Maxima PLUS MRP Series is the evolution of Maxima EVO MPG model:

constant flow rate manually adjustable

proportional flow rate according to an external analogic (4-20 mA) or digital signal (water meter)

management of the digital signal:
o division mode (1÷999=n)
o multiplication mode (n=1÷999)
Pacing function adjustable by dip switch
Timer function
ppm proportional dosing
Statistics
Password
Input On-Off (remote control)
Moreover, this series presents AN INNOVATIVE AND EXCLUSIVE ELECTRONIC STROKE ADJUSTMENT. From 100
to 30% stroke length can be regulated simply pressing the appropriate buttons on the frontal panel.
With this pump, is possible to cover a flow rate range from 8 to 25 l/h and a back pressure from 0.1 to 14 bar. The power supply
is 100÷240 Vac – 50/60 Hz therefore the same pump can operate with different supply voltage. The standard pump head is in
PVDF, therefore high chemical compatibility with several liquids end. Maxima PLUS MRP series is equipped with a manually
priming pump for the start up.
The pump is furnished with a complete standard installation kit, which includes: PVDF foot filter and injection valve, PVC suction
tube, PE delivery tube.

1 of 4

Technical data can be changed without notice.
TD_Maxima PLUS_MRP_Series_rev.0.1