Maxima PLUS MGR series0 pages

DOSING PUMP

Maxima PLUS MGR

SERIES- Solenoid dosing pump

Technical characteristics
Flow rates: from 8 to 25 l/h
Max back pressure: up to 14 bar
Power supply:
100÷240 Vac - 50/60 Hz
Stroke rate: 300 strokes/minute
Stroke length regulation: from 30% to 100%
Pump head:
PVDF
Diaphragm: PTFE
External Enclosure: PP reinforced with fiber glass
protection degree IP65
Manually priming valve
Installation kit: Included

Seko Maxima EVO MGR Series is an analogic dosing pump with:

constant flow rate manually adjustable

proportional flow rate according to an external analogic (4-20 mA) or digital signal (water meter)

Six positions adjustable switch:
3 in division mode (1, 4, 10=n)
1 in multiplication mode (n=1)
1 for proportional mode 4-20 mA signal
1 for constant functionality
Pacing function adjustable by dip switch
Moreover, this series presents AN INNOVATIVE AND EXCLUSIVE ELECTRONIC STROKE ADJUSTMENT. From 100
to 30% stroke length can be regulated simply using the appropriate knobon the frontal panel.
With this pump, is possible to cover a flow rate range from 8 to 25 l/h and a back pressure from 0.1 to 14 bar. The power supply
is 100÷240 Vac – 50/60 Hz therefore the same pump can operate with different supply voltage. The standard pump head is in
PVDF, therefore high chemical compatibility with several liquids end. Maxima PLUS MGR series is equipped with a manually
priming pump for the start up.
The standard pump head is in PVDF, therefore high chemical compatibility with several liquids end .
All Tekna series are equipped with a manually priming for the start up.
The pump is furnished with a complete standard installation kit, which includes: PVDF foot filter and injection valve, PVC suction
tube, PE delivery tube.

1 of 4

Technical data can be changed without notice.
TD_Maxima PLUS_MGR_Series_rev.0.1