Ultraprobe Accessories0 pages

ULTRAPROBE

®

Accessories

DHC Noise Isolating
Headphones

UWC Ultrasonic Wave
Form Concentrator

RAS/RAM Remote
Access Sensor

There are two models. Both meet or
exceed ANSI specifications and OSHA
standards with over 23 dB of noise
attenuation. DHC-2 has a headband
loop to keep the phones over the ears
while DHC-2HH is for Hard Hat use.
The DHC-2HH is standard equipment
for Ultraprobe® models except the
model 100.

More than double the detection
distance of standard scanning modules
with this extre-mely sensitive and
directional parabolic dish. The UWC
utilizes seven transducers to provide
pinpoint accuracy with a 5° reception
field. Detection Range: 34 bar (5 psi)
through 0.127 mm (0.008”) orifice at
distance of 30.48 m (100 ft).

When accessibility is an issue such
as when a motor is contained within a
closed cabinet, or a test point is in a
hard-toreach area, the RAS/RAM is an
answer. Mount the RAS Sen­ or on the
s
test point and run a cable to an access
area where the RAM (Remote Access
Module) can be placed. When the point
is to be tested, plug the RAM into your
Ultraprobe and view or data log the
information.

Ultraprobe® 550, 2000: UWC-2000
Ultraprobe® 9000 & 10,000: UWC-9/10

Ultraprobe® 550, 2000: RAS-2
Ultraprobe® 9000 & 10,000: RAS-9/10

LRM Long Range Module
A uniquely designed parabolic
microphone that lets you detect
leaks and electrical discharges
at a distance. The LRM doubles
the detection distanceof standard
scanning modules.
Ultraprobe® 550, 2000: LRM-2
Ultraprobe® 3000: LRM-3
Ultraprobe® 9000 & 10,000: LRM-9/10

HTS Holster
Carry your Ultraprobe® on your belt,
hands free. Be sure to order the correct
holster for your Ultraprobe® model.
Ultraprobe® 100: HTS-1
Ultraprobe® 201: HTS-201
Ultraprobe® 550, 2000, 9000: HTS-2
Ultraprobe® 3000: HTS-3
Ultraprobe® 10,000: HTS-10

CFM The Close Focus Module
Enhances leak detection of low level
leaks and negative pressure (vacuum)
leaks. Designed for close up scanning.
The receiving chamber focuses all low
level acoustic energy straight to the
transducer with little loss of energy.
Ultraprobe® 550, 2000: CFM-2
Ultraprobe® 9000 & 10,000: CFM-9/10