Remote Access Sensor0 pages

UE RAS
Remote Access Sensor
When Remote Sensing or Access is an Issue
Enclosed Cabinets
Out of Reach? No Problem!
Easy to Install, Simple to Use
Have you ever had a problem where
you can’t get your contact (stethoscope) probe
on a bearing because it is enclosed in a cabinet?
RAS (Remote Access Sensor) is your answer.
Installation is simple!
Just mount the RAS transducer on your test subject,
attach the BNC cable, run the cable through an access
hole and plug it into your Ultraprobe 9000 or 10,000.
To get started, you’ll need:
• RAS Permanent Mounted Sensor with a 25’ (17.6m) cable*
• RAM Adaptor (connects to Ultraprobe 9000 and 10,000 only)
*Multiple RAS transducers may be connected to one Remote Access Module.
Testing is real easy!
Now, every time you come by, just plug it
into your Ultraprobe® 9000 or 10,000,
record your data and move on.
UE RAS Specifications
Transducer:
Piezoelectric, stainless steel housing with female
BNC connector
Dimensions:
Dia. 1.0” (2.54 cm) Length: 2.4” (6.1 cm)
Thread:
(female) 10/32
Cable:
BNC connector, 25 ft (7.6 m) standard.
Can be ordered up to 50 ft. (15.2 m)
Preamp:
Electronics are designed to interface with
Ultraprobe 9000 and 10,000 models only
Frequency Response: 20 kHz - 100kHz
Operating Temp.:
32° - 140°F (0° - 60° C)
14 Hayes Street, Elmsford, NY 10523-2536 USA
DE
MA
IN .
.A
U.S
Toll Free: 1-800-223-1325 • Tel: 914-592-1220 • Fax: 914-347-2181
Email: info@uesystems.com • Internet: http://www.uesystems.com
The Ultrasound Company
© 2003 UE Systems, Inc.
UE RAS - 0311