Socan Close Loop Current Sensor SCB2 Series0 pages
Socan SCB2 technical parameters Magnetic Balance Halll Current Transducer
—______ Model Parameters(23°C)~^^^^ | SCB2-5mA | SCB2-10mA |
iNumiriai Kins ourrem upnj | ±5mA | ±10mA |
Measuring Range \\p) | 2*lpn | |
KOaU rvcSISlance rvlTlaX | 100-200Q | |
Supply Voltage | ±25mA | |
Turns Ratio | 5000:1000 | 2500:1000 |
Measuring Resistance | 710Q | 310KQ |
vvorKing vonage | DC ±12Vor±15V (±5%) | |
Accuracy (cy i a-zo u | ±0.8% FS | |
Linearity @ Ta=25°C | ±0.2% FS | |
Offset Current | Typical values ± 0.16mA, maximum ±0.35mA | |
Offset temperature cn a racte nsiics | < ±0.02%/°C | |
\ neiTiai UNIT OT VO | Typical values ± 0.1mA, maximum ±0.5mA | |
ui/ui Toiiowing accuracy | >100A/us | |
Danciwiciin | DC ~150kHz | |
rveponse lime | < 20uS | |
nysieresis oirsei | < 0.5mA (if=F.S. 0<......>Norminal RMS Current) | |
vviinsianci vonage | 3kVrms/50Hz/min | |
\_/UIIClll OUI loUl 11 [JLIUI 1 | 13mA + output current | |
Operating temperature | -20-+80 °C | |
Storage temperature | -40-+85 °C |
Dimension (mm) and Connection
□ IN— Mo
20,32
J ; J | 3 |
1 17,2 | 5,5 |
u+ -1 1- | ■ 0 — t> MO o — Go | +1N |
u- | -15v - | |
1 T | ||
Rl0 4 |
Instructions
1.Installation dimensions need fit to the sensor size, avoid to squeezing the pin, it would open the internal pin
circuit connections.
2.Recommend mounting aperture of 01.2.
3.Use 30w or less soldering iron for pin welding and do it as short as possible to avoid internal pin connections
open.
Caution: Incorrect wiring may damage the sensor
SoC.m
SHENZHEN SOCAN TECHNOLOGIES CO.,LTD
"