t027 TP200 Rain gauge Transducer, 200cm² funnel area0 pages
t027 TP200
Tutte le informazioni contenute in questo documento sono quelle attuali al momento della stampa, Siap+Micros S.r.l. si riserva il diritto di cambiarle senza alcun preavviso.
All the information content in this document are the current available at the printing phase. Siap+Micros reserve the rights to change the specifications without any advance notice.
Trasduttore di Precipitazione, area bocca 200 cm²
Rain gauge Transducer, 200cm² funnel area
Principio di Misura: Il sensore è composto da un’area di
raccolta nota e da una bascula a doppia vaschetta
collegata ad un magnete che genera un impulso in uscita
ad ogni commutazione. Quando una vaschetta è piena il
peso dell'acqua attua la basculazione, provocando lo
scarico dell’acqua e posizionando l'altra vaschetta nella
posizione di raccolta, pronta per eseguire il successivo
ciclo.
Sensori Intelligenti (non nella versione TP200-N): Il
sensore appartiene alla famiglia dei sensori intelligenti in
quanto dotato di micro-processore interno che esegue tra
altre funzioni di: controllo del corretto funzionamento, preelaborazione dei dati, conversione A/D dei segnali elettrici
ecc. Queste caratteristiche garantiscono eccellente
accuratezza, elevata affidabilità dei dati.
Certificato di Calibrazione: Il sensore può essere
corredato di certificato di calibrazione SIAP+MICROS
oppure da certificati rilasciati da altri laboratori esterni (SIT,
Colonnetti, ecc.).
Materiali e norme Internazionali: Il corpo del sensore è in
lega di alluminio anticorrosione e viterie in acciaio inox. Il
trasduttore è conforme a quanto previsto nella normative
Europea su EMC, è protetto contro le sovratensioni e
risponde
pienamente
alle
prescrizioni
dell’OMM
(Organizzazione Meteorologica Mondiale).
Intelligent sensor (not in version TP200-N): The sensor
belongs to the intelligent sensor family as based on a
micro-processor chip that execute among other functions:
the correct control functioning, data pre-processing,
electrical signal A/D conversion etc. This characteristics
warranty excellent accuracy, long-term stability and high
data reliability.
Laboratory calibration: The sensor can be supplied with
a SIAP+MICROS calibration certificate or with calibration
certificates issues by external primary metrological
services (SIT, Colonetti, ecc).
Housing materials and International standards: The
sensor body is made of anodized aluminum corrosionproofing with stainless steel screws. The transducer
complies with CE EMC standards, it’s protected against
over tensions and is fully compliant within the WMO
(World Meteorological Organization) standards.
Codici d’ordine
Ordering codes
Descrizione
Trasduttore con uscita contatto a relè
Codice / Code
t027a TP200-N
Trasduttore con uscita in corrente 4÷20 mA,
0÷2 Vdc, RS485
Per ordini o contatti commerciali
t027 TP200.doc (01)
lunedì 20 ottobre 2014
Measure principle: The sensor is composed by a know
collecting area and two tipping buckets connected to a
permanent magnet that generates at each commutation
an output closing electrical contact. When a bucked is full,
the weight of the water operates the tilting, causing the
former to be empty and putting the latter in the collecting
position, ready to continue the measuring cycle.
t027b TP200-IVS
e-mail: sales@siapmicros.com
Description
Transducer with reed contact output
Transducer with output 4÷20 mA, 0÷2Vdc,
RS485
For further inquires or quotations
"