t012 TTS Ground Surface Temperature Transducer0 pages
t012 TTS
t012 TTS.doc (v.01)
mercoledì 12 gennaio 2011
Tutte le informazioni contenute in questo documento sono quelle attuali al momento della stampa, Siap+Micros S.r.l. si riserva il diritto di cambiarle senza alcun preavviso.
All the information content in this document are the current available at the printing phase. Siap+Micros reserve the rights to change the specifications without any advance notice.
Trasduttore di Temperatura di Superficie
Ground Surface Temperature Transducer
Principio di Misura: L’elemento sensibile è costituito da
termoresistenza al platino Pt100 con curva di risposta
secondo norme DIN 43760 classe 1/3. Uno schermo
esterno ripara il trasduttore dalla pioggia e dalla radiazione
solare.
Sensori Intelligenti: Il trasduttore appartiene alla famiglia
dei sensori intelligenti in quanto dotato di micro-processore
interno che esegue tra altre funzioni di: controllo del
corretto funzionamento, pre-elaborazione dei dati,
conversione A/D dei segnali elettrici ecc. Queste
caratteristiche garantiscono eccellente accuratezza,
elevata affidabilità dei dati.
Certificato di Calibrazione: Il sensore può essere
corredato di certificato di calibrazione Siap+Micros oppure
da certificati rilasciati da altri laboratori esterni (SIT,
Colonnetti, ecc.).
Materiali e norme Internazionali: Il corpo del sensore è
in materiale plastico, lo schermo di protezione è realizzato
in ABS (materiale plastico resistente e non igroscopico),
UV resistente e a bassa capacità termica e in modo di
garantire una stabilità nel tempo e viterie in acciaio inox. Il
trasduttore è conforme a quanto previsto dalle direttive
Europee su EMC (89/336/CE), è protetto contro le
sovratensioni e risponde pienamente alle prescrizioni
dell’OMM (Organizzazione Meteorologica Mondiale).
Measure principle: The sensing element is based on a
Pt100 Platinum resistance with response curve agree
Class 1/3 DIN 43760 standard. An external plastic shield
protects the transducer against precipitation and solar
radiation.
Intelligent sensor: The transducer belongs to the
intelligent sensor family as based on a micro-processor
chip that execute among other functions: the correct
control functioning, data pre-processing, electrical signal
A/D conversion etc. This characteristics warranty excellent
accuracy, long-term stability and high data reliability.
Laboratory calibration: The sensor can be supplied with
a SIAP+MICROS calibration certificate or with calibration
certificates issues by
external primary metrological
services (SIT, Colonetti, ecc).
Housing materials and International standards: The
transducer body is made of plastic material, the protection
shield is made on ABS (a resistant plastic material and
non-hygroscopic), UV stabilized material with low thermal
characteristics that assure long-term stability and with
stainless steel screws. The transducer complies with CE
EMC directives (89/336/EEC), it’s protected against over
tensions and is fully compliant within the WMO (World
Meteorological Organization) standards.
Codici d’ordine
Descrizione
Ordering codes
Codice / Code
Description
Trasduttore con uscita naturale a Pt100
t012 TTS-N
Transducer with natural output Pt100
Trasduttore con uscita in corrente 4÷20 mA
t012a TTS-I
Transducer with current output 4÷20 mA
Trasduttore con uscita in tensione 0÷2 Vdc
t012b TTS-V
Transducer with voltage output 0÷2 Vdc
Trasduttore con uscita seriale RS485
t012c TTS-S
Transducer with serial output RS485
Per ordini o contatti commerciali
e-mail: sales@siapmicros.com
For further inquires or quotations
"