Solenoid BEllV0 pages

Solenoids
Solenoid BEllV
to VDE 0580
Plug plate to ISO 4400/DIN 43650
Protection class IP65
DESCRIPTION
The BEllV is a switching solenoid. Its design
corresponds to VDE standard 0580. The steel
housing is zinc coated as a standard. Static
pressure-tightness is 160 bars. All o-rings are
Viton. The solenoids are fixed to the valve with
four screws. Depending on the intended use,
the solenoid can be supplied with a plug screw,
or with integrated manual override. The connector plate corresponds to ISO 4400 and DIN
43650.
FUNCTION
When the solenoid is energised with the specified
nominal voltage, the armature moves from the
starting position of its stroke (s=3,2 mm) to the
end position (s= 0 mm). The switching time is
essentially dependent on the application. The
power-stroke characteristics are de-signed to suit
the requirements of hydraulic valves. AC versions
include an electronic rectifier integrated into the
connector plate. In this way maximum performance is assured.
CONTENTS
TYPE CODE
DIMENSIONS .............................................. 1
CHARACTERISTICS ................................... 2
Economy-solenoid
IIndustry version
Square 35 mm housing
PERFORMANCE ......................................... 2
Solenoid completly potted
ACCESSOIRES ........................................... 2
Standard-nominal voltages UN
APPLICATION
Essential for hydraulic directional and poppet
valves. Because of the risk of overheating, the
solenoid must never be used separately. The
lenght of the fixing screws depends on the base
material of the body. An o-ring is used for the
valve seal. Information on screws and o-rings
will be found in the data sheets relating to the
valves concerned. Before changing the plug
screw or the screw with integrated manual
override, care must be taken to ensure that the
solenoid is not under pressure. Risk of injury!
The maximum operating pressure is determinded
by the valve actually used.
BE ll V -
12 VDC
24 VDC
110 VAC
115 VAC
230 VAC
#
-
G12
G24
R110 ∗
R115 ∗
R230 ∗
AC = 50 bis 60 Hz
∗ Rectifier integrated in the plug plate
Other nominal voltages and nominal power on request
with mounted plug (data sheet 1.1-300)
with mounted manual override (data sheet 1.1-300)
with mounted special manual override (data sheet 1.1-310)
HB0
HB4,5
H...
Design-Index (Subject to change)
DIMENSIONS
6 ,2 5
8
4 ,5
3 9
1 2 ,5
4 ,5
7 4
4 5 ,5
3 2
2 ,9
M 8 x 0 ,7 5
1 ,3
2 ,2
4 4 ,7
2 8
5 9
3 5
9 ,9
S o le n o id e n e r g is e d ( s = 0 )
Wandfluh AG
Postfach
CH-3714 Frutigen
Tel. +41 33 672 72 72
Fax +41 33 672 72 12
E-mail: sales@wandfluh.com
Internet: www.wandfluh.com
Illustrations not obligatory
Data subject to change
Data sheet no.
1.1-100E 1/2
Edition 05 01