Solenoid SIS29V0 pages

Solenoids
Solenoid SIS29V
to VDE 0580
Plug plate to ISO 4400/DIN 43650
Protection class IP65
DESCRIPTION
The SIS29V is a switching solenoid. Its design
corresponds to VDE standard 0580. The steel
housing is zinc coated as a standard. Static
pressure-tightness is 350 bars. All o-rings are
Viton. The solenoids are fixed to the valve with
four screws. Depending on the intended use,
the solenoid can be supplied with a plug screw,
or with integrated manual override. The connector plate corresponds to ISO 4400 and DIN
43650.
FUNCTION
When the solenoid is energised with the
specified nominal voltage, the armature moves
from the starting position of its stroke (s=2,5
mm) to the end position (s= 0 mm). The
switching time is essentially dependent on the
application. The power-stroke characteristics
are designed to suit the requirements of hydraulic
valves. AC versions include an electronic rectifier
integrated into the connector plate. In this way
maximum performance is assured.
CONTENTS
TYPE CODE
DIMENSIONS .............................................. 1
CHARACTERISTICS ................................... 2
PERFORMANCE ......................................... 2
ACCESSOIRES ........................................... 2
APPLICATION
Essential for hydraulic directional and poppet
valves. Because of the risk of overheating, the
solenoid must never be used separately. The
lenght of the fixing screws depends on the
base material of the body. An o-ring is used for
the valve seal. Information on screws and orings will be found in the data sheets relating to
the valves concerned. Before changing the
plug screw or the screw with integrated manual
override, care must be taken to ensure that the
solenoid is not under pressure. Risk of injury!
The maximum operating pressure is determinded
by the valve actually used.
SI S 29 V -
#
-
Solenoid
Industry version
Super
Square 29 mm housing
Solenoid completly potted
Standard-Nominal voltage UN
12 VDC
24 VDC
110 VAC
115 VAC
230 VAC
G12
G24
R110 ∗
R115 ∗
R230 ∗
AC= 50 to 60 Hz
∗ Rectifier integrated in the plug plate
Other nominal voltages and nominal power on request
with mounted plug (data sheet 1.1-300)
with mounted manual override (data sheet 1.1-300)
with mounted special manual override (data sheet 1.1-310)
HB0
HB4,5
H...
Design-Index (Subject to change)
DIMENSIONS
6
6 ,5
4 ,5
3 5
1 ,7
4 2
2 3
2 9
5 5
Wandfluh AG
Postfach
CH-3714 Frutigen
Tel. +41 33 672 72 72
Fax +41 33 672 72 12
E-mail: sales@wandfluh.com
Internet: www.wandfluh.com
3 ,3 5 ( Æ 1 ,5 ; a n y p o s itio n )
3 ,4
2 0
2 7
3 9 ,5
2 ,9
M 8 x 0 ,7 5
6 8
1 ,6
6 ,3
S o le n o id e n e r g is e d ( s = 0 )
Illustrations not obligatory
Data subject to change
Data sheet no.
1.1-85E 1/2
Edition 05 01