BinMaster SmartBob MUCM Brochure0 pages

"MUCM SmartBob II Momentum Universal Communication Module nn

Easy Serial Interface to PLC, HMI or DCS Systems

nn

SMARTBOB II INVENTORY MANAGEMENT SYSTEM

nn

The SmartBob II Momentum Universal Communication Module (MUCM) allows a Modbus serial master to gather data from up to 32 BinMaster SmartBob II remotes. The data from each SmartBob II remote is presented as a Modbus Holding Register (4x). Each bob is assigned a unique Modbus slave address. A special Modbus slave address of 247 is provided to initiate a measurement and to give a summary of all the measurements from the SmartBob Remotes in the network. The MUCM may be configured as a Modbus RTU or a Modbus ASCII slave

♦ >

nnProven Technology

♦ >

nnReliable & Repeatable measurements

♦ >

nnNot affected by changing material characteristics

♦ >

nnUnaffected by dust, temperature, dielectric constant, humidity or angle of repose

♦ >

nnMinimal contact with material nn

SmartBob II Momentum Universal Communication Module (MUCM) . The standard model allows Modbus serial masters to gather data from BinMaster SmartBob II remotes. ♦ >

nnNo field calibration or adjustments required nn

.

nn

The system shown in figure 1.1 shows a Modbus Master (HMI,DCS,or PLC), a SmartBob II MUCM, and eight SmartBob II remotes located on vessels. The Modbus RTU master has an RS-232 port that connects to the MUCM. The SmartBob remotes are connected to the MUCM via a multi-drop RS-485 network, are set for slave addresses 1 through 8, and are mapped to Modbus slave addresses 1 through 8 respectively.

♦ >

nnAffordable nn

MUCM ModBus Master Power RS-232 Serial Cable RS-485 Cable Division of Garner Industries 7201 N. 98th Street Lincoln, NE 68507 Fax (402) 434-9133 (402) 434-9102 www.binmaster.com >

nn

1-800-278-4241

nn

Brand and product names mentioned in this document are trademarks or registered trademarks of their respective companies. SmartBob II Remotes Figure 1.1 size="-2">

"