Series QC cylinders0 pages

CATALOGUE > Release 8.5

MOVEMENT > Series QC cylinders

Cylinders with integrated guide
Series QCT and QCB

MOVEMENT

1

Double-acting, magnetic piston, guided
ø 20, 25, 32, 40, 50, 63 mm

»» Magnetic sensors can be
mounted on both sides
»» QCT: bronze
bushings version
»» QCB: ball bearing
guide version
»» Movement and
guidance in one unit

Both versions are equipped with fixed
cushioning to prevent direct impact with the
end covers. The design of the cylinder body
allows the mounting of the cylinder using
either top, bottom or side faces. Several “T”
shaped grooves in two faces allow sensors
to be fitted in a number of positions.
Out of standard strokes are available on
demand only.
These actuators, suitable for use in very limited space, are available in two versions.
QCT version: with sintered bronze bushes, suitable when the side loads applied to the
cylinder are high.
QCB version: with linear ball bearings, suitable for high precision and fast cycling
applications.

GENERAL DATA
Type of construction

compact guided
QCT = sintered bronze bushes
QCB = linear ball bearings

Operation

double-acting

Materials

body = anodized AL
flange = zinc-plated steel
piston rod = rolled stainless steel AISI 303
QCT columns = rolled stainless steel 420B
QCB columns = hardened steel C50
seals = PU

Mounting

threaded and non-threaded holes in the body

Strokes min. max

see table

Operating temperature 0°C ÷ 80°C (with dry air - 20°C)
Speed

50 ÷ 500 mm/s

Operating pressure

1 ÷ 10 bar

Fluid

clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should
never be interrupted.

Products designed for industrial applications.
General terms and conditions for sale are available on www.camozzi.com.

1/4.05.01