Series 41 cylinders0 pages

CATALOGUE > Release 8.5

MOVEMENT > Series 41 cylinders

MOVEMENT

1

Series 41 cylinders - Aluminium profile
Double-acting, cushioned, magnetic
ø 160 - 200 mm

»» In compliance with ISO 6431/
VDMA 24562 standards
»» Rolled stainless steel rod
»» Adjustable pneumatic
cushioning

Series 41 cylinders with bores 160 and
200mm have been designed so as to
comply with the dimensions laid down
in the DIN/ISO 6431 standards. The
extruded aluminium tube in this series is
regarded as very aesthetically pleasing.

The mounting brackets used on the endblocks tube are designed in an extremely
secure way, making use of the cylinder
tie-rods positioned internally and not
visible on the assembled cylinders. This
cylinder series is normally equipped with
adjustable cushioning.
Moreover, to reduce the noise of the
impact of the piston and end-caps,
these cylinders are equipped with a
mechanical cushioning.

GENERAL DATA
Type of construction

with tie-rods

Operation

double-acting

Materials

AL end blocks and piston, rolled stainless steel AISI 420B piston rod, zinc-plated steel piston rod nut, anodized AL-profile tube,
zinc-plated steel tie-rods and tie-rod nuts, NBR rod - piston - cushion seals

Mounting

with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination

Strokes min - max

10 ÷ 2500 mm

Operating temperature 0°C ÷ 80°C (with dry air - 20°C)
Operating pressure

1 ÷ 10 bar

Speed

10 ÷ 500 mm/sec (without load)

Fluid

filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32.
Once applied the lubrication should never be interrupted.

1/1.15.01

Products designed for industrial applications.
General terms and conditions for sale are available on www.camozzi.com.