LN Series0 pages

Line Lights

LN Series

Line-shaped, convergent-beam system

The convergent beam system uses a cylindrical lens to produce highly focused LED illumination.

LN-series Convergent Line Lights

High-output LN-HK Series

Light from the chip LEDs inside the unit passes
through the cylindrical lens and is formed into a
high-intensity, tightly focused beam. The beam width
can be adjusted by changing the End Unit. Units with
60-mm or 200-mm light-emitting surfaces are available.
The LEDs comes in red, white, blue, or green.

High output is achieved by the use of white power
LEDs and a unique heat dissipating construction. Units
with 60-mm or 200-mm light-emitting surfaces are
available. The standard models come with white LEDs.

LN-200SW2-HK-STK Illumination Image

LN-60RD2 Illumination Image

Cylindrical Lens

Chip LED

The LN-HK Series has an output that is high enough to
replace halogen light sources. The LN-200SW2-HK-STK
with a 200-mm light-emitting surface consumes only 22
W, which can provide a large energy savings. Running
costs will also be reduced as LEDs have a long service
life and they do not burn out like halogen lamps.

Illumination Structure of LN-60RD2

Examples of Convergent Beam Light Images

The workpiece is illuminated with high-luminosity light
from chip LEDs that has been converged into a line by
passing it through a cylindrical lens on the front.

Inspecting the side of a coin

Measurement inspection
of connector pin widths

Surface inspection on glass surface.

Convergent line light illuminates
only the side of the coin.

Only the tip of each connector pin is
illuminated, enabling point inspection.

Light is projected from side,
thus illuminating scratch.

Light used: LN-60RD2

Light used: LN-60RD2

Light used: LN-60RD2

Camera
This model

Cylindrical lens

Object

59