CT type0 pages
CTE, CTA, CTH Type - Serie CTE, CTA, CTH
The modular three-phase capacitors are designed to compensate
industrial networks in low voltage. Their installation and assembly
is easy thanks to the modular design. Due to their construction
within a burst proof sheet steel external case, this allows optimum
heat dissipation. Inside there are three single-phase units, which
are equipped with pressure sensitive disconnectors.
In addition to this construction, the self-extinguishing properties
of the materials used for the insulators and the protective cap
represent a good safety-device against possible bursting.
Les condensateurs modulaires represented la solution ideate
pour la compensation de charges. Leur installation et assemblage
sont tres facile parce-que ils sont modulaires. Le boftier exterieur
est realise en tole acier, afin de beneficier d'une tres bonne
dissipation de la chaleur. A I'interieur il y a trois unites
monophasees, chacune equipee d'un systeme anti-eclatement.
En ajoutant a cette construction des parties isolantes et un capot
en matiere auto-extinguible on garanti un bon dispositif de non
propagation de la flamme.
MAIN FEATURES
CARACTERISTIQUES TECHNIQUES
Dielectric:
metallized polypropylene (MKP)
Execution:
oil (P.C.B. free) (CTE dry type)
Capacitance tolerance:
-5%/+10%
Rated frequency:
50Hz - 60Hz
Supply:
three-phase + earth
Max. allowable voltage:
1,1 Un (max 8h on 24h)
Voltage rate of rise:
25 V / u sec
Temperature class category:
-25/C
max. value of ambient temperature: +50°C
average daily ambient temperature: +40°C
average yearly ambient temperature: +30°C
Degree of protection (CEI EN 60529):
with cover IP 40
Reference Standards capacitors:
CEI EN 60831-1/2, IEC 831-1/2
Test voltage between terminals:
2,15 Un/2 sec
Test voltage between terminals / case:
3000 Vac / 2 sec
Dielectric losses:
<, 0,2 W/kvar
Total losses of the capacitors:
<, 0,4 W/kvar
Discharge resistor:
75Vresidual within 3min - included
Chokes coils which reduce
the switch-on inrush current:
not. included
Unit mounting:
vertical only
Parallel connection links:
included
Type of service:
continuous - indoors
Dielectrique:
polypropylene metallise (MKP)
Realisation:
huile (sans PCB) (CTE sans huile)
Tolerance sur la capacite:
-5%/+10%
Frequence nominale:
50Hz - 60Hz
Alimentation:
triphasee + terre
Max. valeur de tension:
1,1 Un (max 8 heures sur 24)
Variation tension/temps:
25 V/u sec
Classe de temperature:
-25/C
valeur max. de la temperature ambiante: +50°C
moyenne journaliere: +40°C
moyenne annuelle: +30"C
Degre de protection (CEI EN 60.529):
avec capot IP 40
Normes des references:
CEI EN 60831-1/2, IEC 831-1/2
Tension d'essai entre les terminaux:
2,15 Un/2 sec
Tension d'essai entre terminaux et bottlers:
3000 Vac/2 sec
Pertes du dielectrique:
<, 0,2 W/kvar
Pertes max. par dissipation:
<, 0,4 W/kvar
Resistances de decharge:
75V en 3min - incluses
Selfs de choc pour reduire
les surintensites d'insertion:
non incluses
Montage:
vertical
Barres de connexion parallele:
incluses
Type de service:
continu pour interieur
if
Modular assembling system
whit connection links
Systeme de branchement modulaire
avec barres de connexion
ED 01.53 UK-FRA REV. E
"