DGM SERIES0 pages

Magnet drive gear pump-motor units
DGM09 series

Find out more

The DGM09 series magnet drive gear pumps derive from the
well established mag drive MG200 series.
Built to handle clean water and relatively viscous fluids at low
pressure, the DGM09 series pump-motor unit has low pulsation
and is capable of handling fluids at a maximum temperature of
95 °C (203 F). The pump housing and the gears are made of
Vectra. Seals are available in NBR, EPDM or VITON®.
The seal less design is guarantee of reliability. Suction/discharge
ports are 8 mm barbed end.
• Motor: 12-24 V DC, 3000 rpm, brush type

MAIN APPLICATIONS
• Water purification

• Water recirculation

• Laser cooling

• Condensation removal

• Spraying

• Low pressure carbonation

MODEL NUMBER MATRIX
DESCRIPTION

2t

DGMt 09t

3t

4t

1

Pump series

0000

2

Gears width thickness
Elastic material

4

Codet

1t

Customiz.

3

t ositiont
P

Motor

Et M01t

61.2 [2.4094]
1.2
[0.0472]

Ø 27

[Ø 1.0629]

Ø 44.5 ± 0.05

[Ø 1.7527 ± 0.0019]

Ø 40
[Ø 1.5747]

Ø 3.5

[Ø 0.11377]

Ø 51 [2.0076]

12.5 [0.4921]

DGM = magnet drive
09 = 9 mm
E = EPDMt
N = NBRtt
V = VITON®
000 = none M01 = 3000 rpm/24V M03 = 3000 rpm/12V

17.5
[0.6889]

Ø 56 [2.2047]

5
[0.1968]

CODE

Connections
for 8 mm [0.3149]
I.D. Pipes

POS

Dimensions in mm [inches]

* Dimensions without motor and adapter

www.fluidotech.com