COOLING WATER RECIRCULATION SYSTEM0 pages

MDG-113B - (5/02)
FUSION INCORPORATED
4658 E. 355th St. Willoughby, OH 44094 • Phone (440) 946-3300 • FAX (440) 942-9083
Web: www.fusion-inc.com • e-mail: info@fusion-inc.com
COOLING WATER RECIRCULATION SYSTEM
100 Gallon / 378 Liter Capacity
The Fusion Water Recirculating System is
designed to be used with brazing and soldering
machines. It can be easily retrofitted onto any
existing machine or included as an option on new
equipment.
The closed loop system begins with an electric
pump moving water from the first 50 gallon / 189
liter polypropylene tank. Water enters the brazing
machine through the water inlet and onto the part
to be cooled. Machine wastewater then drains
back into a second 50 gallon / 189 liter tank and
passes over a baffle to allow for sediment settling
prior to repeating the cycle. The system
incorporates a water replenishment feature to
compensate for evaporation.
Specifications
Tank:
Polypropylene with a
temperature rating of 212°F /
100°C max.
Electric:
208-230/460V/ 3PH / 60 / 50Hz
Pump:
10 USGPM / 37 l/m capacity, ¾
HP motor, close coupled
centrifugal, all bronze
casing/impeller.
Weight:
450 lbs. / 204 Kg (without
water)
Dimensions:
See Reverse Side
The water recirculation system is designed to
minimize water usage.
(An average brazing
machine uses 50 to 65 gallons / 189 to 246 liters of
water per hour, therefore, the savings in water can
be significant.) The frequency of draining the tank
is based on many factors, such as the base metals
of the parts being joined, the constituents in the
brazing/soldering paste, the amount of paste being
used, the number of hours (shifts) the machine is
run, and the degree of impurities the local
environmental regulations allow to be deposited in
the sewage system. Due to the wide variations in
all of the factors, it is not possible to precisely state
when the water should be changed, but as a “rule
of thumb” the frequency should be once per day.
The system is not represented as a treatment
system.