"Braze Mate" Model 1500 pages

Brazing & Soldering
APPLICATION DATA
No. 521 - Aluminum A/C
Assembly
"Braze Mate" Model 150
Machine Specifications
!
!
!
!
!
!
!
Assembly: Four, 3/8" O.D. tubes to union
block; 28" OAL.
Paste Filler Metal: Fusion KNC-1040-400,
non-corrosive flux, 1040°F liquidus.
Production Rate: 60 parts per hour, one
operator.
Dimensions: 72"W x 56"D x 38" load height.
Utilities: 120V, single phase, 5 Amp; natural
gas or propane, 80 psi air, water and drain.
PLC: Allen Bradley MicroLogix with DTAM
access panel.
Safety Features: Perimeter guarding on 3
sides of machine with safety interlocks.
Stainless steel
fixture holds
assembly in
alignment
throughout
brazing cycle.
Sequence:
1. Operator loads four tubes and block
into stainless steel fixture.
2. Operator depresses touch switches
to actuate automatic brazing cycle.
3. Two slide-mounted applicator guns
advance to apply 4 identical paste
deposits to joint areas, then retract.
4. Gas/air burners advance into
position, adjust to high flame output
and bring filler metal to brazing
temperature.
5. Heat cycle times out, burners retract
into low flame condition.
6. Timed air and water cooling.
7. Operator removes brazed assembly
Premeasured
deposits of
aluminum paste
filler metal are
applied
simultaneously to
four joint areas.
FUSION INCORPORATED
4658 E. 355th St., Willoughby, OH 44094
Phone 1-800-626-9501 o (440) 946-3300
Fax (440) 942-9083 o e-mail: sales@fusion-inc.com