ICG 623 Cable glands0 pages

ICG 623
Cable Glands
Hazardous Area
87
Flameproof Exd & Increased Safety Exe
Dual Certified ATEX / IECEx
Application
15.0mm
• Outdoor or indoor use.
• For use with non-armoured elastomer and plastic insulated cables.
• For particular use with:tape bedding or have hygroscopic fillers.
- Cables that exhibit ‘Cold Flow’ characteristics.
- Enclosures containing an ignition source in gas group IIC areas or
•
Inspectable Compound
Ø 'B'
- Cables that are not effectively filled, compact and/or circular, have
'G' Approx (Fully Compressed Length)
Ø 'E'
Ø 'D'
Entry Thread
Metric
Entry
containing an ignition source in a Zone 1 area and exceeding 2 litres
in volume.
See technical section for installation rules and regulations.
CABLE GLAND SELECTION TABLE
Size Entry Thread Size
Cable Acceptance Details
Ref. Metric
NPT *
Inner Sheath / Cores
Outer Sheath 'B'
Standard or ' D ' Max.
'E' Max In- Max. No. of Standard Seal Alternative Seal (S)
Option
Over Cores ner Sheath
Cores
Min.
Max.
Min.
Max.
Os
O
A
B
C
C2
D
E
F
M20
M20
M20
M25
M32
M40
M50
M63
M75
½"
½"
¾" or ½"
1" or ¾"
1¼" or 1"
1½" or 1¼"
2" or 1½"
2½" or 2"
3" or 2½"
8.0
8.9
11.0
16.2
21.9
26.3
37.1
47.8
59.0
8.0
10.0
12.5
18.4
24.7
29.7
41.7
53.5
66.2 / 65.3¹
6
6
10
21
42
60
80
100
120
3.0
7.5
11.0
13.0
19.0
25.0
31.5
42.5
54.5
8.0
11.9
14.3
20.2
26.5
32.5
44.4
56.3
68.2
8.5
9.5
15.5
22.0
27.5
39.0
48.5
13.4
15.4
21.2
28.0
34.8
46.5
58.3
'G'
56.4
56.4
55.8
58.8
62.0
64.5
72.8
77.0
80.7
Hexagon Dimensions
Across
Across
Flats
Corners
24.0
24.0
30.0
36.0
46.0
55.0
65.0
80.0
95.0
26.5
26.5
32.5
39.5
50.5
60.6
70.8
88.0
104.0
All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard,
15mm length of thread.
¹ Smaller value is applicable when selecting reduced NPT entry option.
Technical Data
• Flameproof Exd and Increased Safety Exe II 2 GD ExtD A21.
• Certificate No’s: Baseefa06ATEX0058X and IECEx BAS 06.0015X.
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in
Gas Groups IIA, IIB and IIC.
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1,
IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days)
to IEC/EN 60529 and NEMA 4X.
• Deluge Protection to DTS01.
• Operating Temperature Range: -60°C to +80°C.
• Assembly Instruction Sheet: AI 305.
• Alternative certification options available:
Exe II
BR-Exd IIC / Exe II
Exd IIC / Exe II
Features
• Provides a barrier seal between the individual insulated cores
•
•
•
•
•
within the cable and prevents entry of the products of an
explosion into the cable.
Assembly of the cable gland compresses and distributes the
compound evenly to create a barrier seal at the point of entry
into the enclosure.
The compound chamber may be separated from the cured
compound to ensure that the chamber has been effectively filled.
If required, external voids can be repaired.
Provides a cable retention seal onto the cables outer sheath.
Manufactured in Brass (standard), Nickel Plated Brass,
316 Stainless Steel or Aluminium.
Brass NPT entries are nickel plated as standard.
GOST R-Exe IIU
GOST K- Approved for use in Kazakhstan
DNV Marine Approval
ABS Marine Approval
Ordering Information
Format for ordering is as follows: Alternative Seal (S), add suffix S to ordering information.
Cable Gland Type
ICG 623
Size
C
Thread
M32
(Optional)
S
Cable Gland Type
ICG 623
Size
C
Thread
1 1/4" NPT
(Optional)
S
Two part sealing compound and assembly instructions are supplied with the cable gland.
Connection Solutions
HPG01
UPD 090610
www.ehawke.com