عضویت 
ورود اعضا
راهنمای خرید
For continuous mixing of bulk products and liquids0 pages
KAHL Continuous Mixer
For continuous mixing of bulk products
and liquids
Our horizontal continuous mixers
are high-speed agitator-blade mixers
in robust design, in which mealy,
granular, fibrous or flaky carrier substances are mixed with liquids free
of lumps according to the whirling
principle.
Several bulk product flows, liquids,
and steam can be added simultaneously.
The throughput time and the type of
whirl formation can be influenced by
the adjustment of the agitator blades.
Thus the mixing effect can be adapted
to the product.
Design
The case consists of a well-dimensioned welded construction and is
provided with a large inspection and
assembly flap. In order to avoid
agglutinations, the mixing chamber
lining can consist of synthetic material
or stainless steel - depending on
requirement. The inner jacket can be
replaced through the assembly flap.
Liquid addition is effected via injection
devices, the design of the which
depends on the type of liquids.
A strong shaft is equipped with the
adjustable and easily exchangeable
mixing tools made of wear-resistant
special cast iron. The shaft runs in
anti-friction bearings arranged outside
the mixing chamber. The mixer shaft is
balanced dynamically with balancing
disks arranged in separate chambers.
The exceptional silence in operation
results from this design. Subsequent
balancing can be effected locally at
any time. Between the mixing and
the balancing chambers the shaft is
provided with special seals.
Application
■ For continuous mixing of compound
feed with liquids and steam.
■ For mixing dried beet pulp with
molasses – if necessary with
synthetic lining.
■ Generally for moistening granular/
powdery products.
■ In general: for (all) mixing tasks
where liquids must be added to
solid matters.
